Electrical System Maintenance; Charging The Battery - Toro 74710 TimeCutter SS 3225 Operator's Manual

A
B
C
D
Figure 38
Electrical System
Maintenance
g027506

Charging the Battery

Removing the Battery
Battery terminals or metal tools could short against
metal machine components causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
• When removing or installing the battery, do not
• Do not allow metal tools to short between
g029685
1. Park the machine on a level surface and disengage the
2. Move the motion-control levers outward to the park
3. Raise the seat to access the battery.
4. Disconnect the negative (black) ground cable from the
31
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
WARNING
allow the battery terminals to touch any metal
parts of the machine.
the battery terminals and metal parts of the
machine.
blade-control switch.
position, stop the engine, remove the key, and wait for
all moving parts to stop before leaving the operating
position.
battery post (Figure 39).
Note: Retain all fasteners.