Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic DMC-FX33 Operating Instructions Manual

Advanced (Recording pictures)
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P43 to 49 and "About the
information " for details about each
scene mode.
1 Press 3/4/2/1 to select the
scene mode.
• Press 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
2 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
• To change the scene mode, press
[MENU/SET], then press 1, and repeat
1 2
steps and above.
42
VQT1K01
∫ About the information
• If you press [DISPLAY] when selecting a
scene mode in step
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
• Refer to P37 for information about the
shutter speed.
• The flash setting is memorised even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
• When you take a picture with a scene
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
• When [MENU/SET] is pressed and the
menu screen is displayed, [
A
selected in the [SCENE MODE] menu.
You can set each of the settings by
pressing 4 and selecting [REC] mode
menu [
• The following items cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [INTELLIGENT ISO]
– [SENSITIVITY]
– [COL.MODE]
1
, explanations about
] is
] or [SETUP] menu [ ].