Setting Date/Time (Clock Set) - Panasonic DMC-FX33 Operating Instructions Manual

switch is slid to the other side, these
functions become available.)
2
• This unit (SDHC compatible equipment) is
compatible with SD Memory Cards based
on SD Memory Card Specifications and
formatted in FAT12 system and FAT16
system. It is also compatible with SDHC
Memory Cards based on SD Memory
Card Specifications and formatted in
FAT32 system.
• You can use an SDHC Memory Card in
equipment that is compatible with SDHC
Memory Cards however you cannot use
an SDHC Memory Card in equipment that
is only compatible with SD Memory Cards.
(Always read the operating instructions for
the equipment being used. If you also
order a photo studio to print pictures, ask
the photo studio before printing.) (P5)
• Refer to P113 for information about the
number of recordable pictures and the
available recording time for each Card.
• We recommend using High Speed SD
Memory Cards/SDHC Memory Cards
when recording motion pictures.
• The data on the built-in memory or the
card may be damaged or lost due to
electromagnetic waves, static electricity or
breakdown of the camera or the card. We
recommend storing important data on a
PC etc.
• Do not format the card on your PC or
other equipment. Format it on the camera
only to ensure proper operation. (P91)
• Keep the Memory Card out of reach of
children to prevent swallowing.
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
OFF ON
A [MENU/SET] button
B Cursor buttons
C Mode dial
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
date and time.
:
:
A Time at the home area
B Time at the travel destination (P54)
• 2/1: Select the desired item.
• 3/4: Set the display order for the date
and time.
• : Cancel without setting the clock.
Preparation
13
VQT1K01