11
SERVICE WORK ON THE CHASSIS
11.19
Installing the shock absorber
11.20
Removing the seat
11.21
Mounting the seat
x
Main work
–
Carefully position the shock absorber into the vehicle from above.
B01472-01
–
Position the frame protector.
Info
Pay attention to the holding lugs.
–
Mount and tighten screw
Guideline
Screw, frame protector
–
Mount cable binder
M00078-11
Finishing work
–
Install the manifold.
–
Install the main silencer. (
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Lift up the seat at the rear, pull it back and then remove it from above.
M00035-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
M00036-01
.
.
(
p. 47)
x
p. 48)
.
M5
3 Nm (2.2 lbf ft)
p. 34)
M6
10 Nm (7.4 lbf ft)
43