Basic Playback Operations (Tape) - Panasonic AG-HVX200E Operating Instructions Manual

Basic playback operations (Tape)

1
Before turning the POWER switch to ON
Set the MEDIA switch to the TAPE position.
2
Turn the POWER switch to ON.
While pressing the lock release, turn the
POWER switch to ON.
3
Press the mode button so the VCR lamp
Operations using the OPERATION button
Play ( )
While the tape is in the stop mode, the playback starts from where
you stopped.
During playback, the unit enters the variable speed search mode and
starts x1-speed playback. (Page 72)
No sound is heard during the playback.
Fast-forward (
During playback, the fast-forward playback starts (at ten times normal
speed).
While the tape is in the stop mode, the unit starts fast-forwarding of
tape.
Rewind (
During playback, the rewind playback starts (at ten times normal
speed).
While the tape is in the stop mode, the unit starts rewinding of tape.
Stop ( )
Pause ( )
Press again to return to playback.
Tape protection mode
To protect the tape, this unit automatically switches to stop mode when five minutes elapse in the playback
pause state or recording pause state. However, the time until stopping is shorter when in a playback pause
state at low temperatures.
)
)
The camera is now in the VCR mode.
• Each time you press the button, the mode
changes as below.
VCR CAMERA
When you press the mode button while VCR
is selected, the unit enters the DUB (dubbing)
mode. (Page 85)
ENGLISH
TAPE
Remote Control
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
/REW FF/
PLAY
STILL ADV PAUSE STILL ADV
INDEX STOP
INDEX STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP
INDEX STOP INDEX
/REW FF/
PLAY
STILL ADV PAUSE STILL ADV
INDEX STOP
INDEX STOP INDEX
E-62