Thumbnail Screen; Basic Thumbnail Screen Operations - Panasonic AG-HVX200E Operating Instructions Manual

Thumbnail screen

Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been
established by the MEDIA switch set to the P2 status, the clips will be displayed on the LCD screen as
thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the
screen.)
You can perform the following operations using the thumbnail screen.
• Play, repair and delete clips as well as add and delete shot marks.
• Format P2 cards and SD memory cards.
• Load the metadata (shooting information, etc.) from SD memory cards to the unit.

Basic thumbnail screen operations

To use the thumbnail menu:
1
On the thumbnail screen, press the MENU button to display the menu.
2
Select the item using the
button.
If another menu appears, repeat this step.
• To return to the previous screen, select EXIT and press
button.
• To release the menu mode, press MENU.
To select thumbnails: Select the thumbnails (the yellow frame moves) using the
and press the
deselect the clip. To scroll the pages, press the PAGE (- or +) button.
To play back clips: Select the thumbnail, and press the
• Only clips whose format is the same as recording format 6 shown in the figure below can be played
back.
THUMBNAIL
• Thumbnail screens are not output from the COMPONENT OUT terminal.
E-63
and buttons, and press the
button (the color of the frame changes to blue-green). Press the
1
2
3
4
5
6
OPERATION
ALL CLIP
SAME FORMAT CLIPS
SELECTED CLIPS
MARKED CLIPS
TEXT MEMO CLIPS
SLOT CLIPS
SETUP
EXIT
or press the
button. (For details on playback, see page 61.)
!
PROPERTY
DELETE CLIP PROPERTY
FORMAT CARD STATUS
REPAIR CLIP DEVICES
EXIT PROPERTY SETUP
SYSTEM INFO
EXIT
(or )
1
MENU
and
button again to
7
8
META DATA
LOAD
RECORD
USER CLIP NAME
INITIALIZE
PROPERTY
EXIT
P2
2
SET
PAGE/
AUDIO MON/VAR
buttons,