Technics SU-G30 Operating Instructions Manual page 36

Operations
Using analogue audio output device
You can input analogue audio signals to this unit and
play back music.
e.g.,
*
Record player
1
Using analogue digital audio cable
1 Disconnect the AC mains lead.
2 Connect this unit and a record player,
etc.
3 Connect the AC mains lead to this unit.
( 17)
4 Press [ ] to turn this unit on.
5 Press [ANALOG] repeatedly to select
"LINE" or "PHONO".
• You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
36
PHONO
EARTH
*
Ground wire
2
(not supplied)
Audio cable
(not supplied)
1: When connecting to a record player with a
*
built-in PHONO equalizer, connect its cable to
the analogue audio input terminals (LINE IN).
* 2: When connecting a record player with a
ground wire, connect the ground wire to the
PHONO EARTH terminal of this unit.
PHONO LINE IN
PHONO
OPT COAX1
EARTH
DIGITAL IN
COAX2 PC
1
10 0