Technics SU-G30 Operating Instructions Manual page 33

Bluetooth device
®
Bluetooth transmission mode
®
You can change the transmission mode to
prioritise transmission quality or sound quality.
1 Press [DIGITAL] repeatedly to select
"Bluetooth".
• You can also select the input source by
turning the input selector knob on the unit.
• If a Bluetooth
® device is already connected,
disconnect it.
2 Press [MENU].
3 Press [ ], [ ] repeatedly to select
"Link Mode" and then press [OK].
4 Press [ ], [ ] to select the mode and
then press [OK].
Mode1:
Emphasis on connectivity
Mode2:
Emphasis on sound quality (default)
Note
• Select "Mode1" if the sound is interrupted.
Operations during playback
Stop
Pause
• Press again to restart play.
Skip
Search
Note
• To use this unit's remote control with a
Bluetooth device, the Bluetooth
®
support AVRCP (Audio Video Remote Control
Profile). Depending on the status of the device,
some controls may not work.
• When enjoying video contents with this
function, the video and audio output may not
be synchronised.
Disconnecting a Bluetooth
1 Press [MENU].
2 Press [ ], [ ] repeatedly to select
"Disconnect?" and then press [OK].
3 Press [ ], [ ] to select "Yes" and then
press [OK].
Note
• The Bluetooth
® device will be disconnected if a
different audio source is selected.
device must
®
device
®
33
Operations