Operations - Technics SU-G30 Operating Instructions Manual

Operations

Playing back music files on the DLNA server
You can share music files stored in the DLNA Certified media server (PC, Network
Attached Storage, etc.) connected to your home network, and enjoy the contents
with this unit.
■
Preparation
• Complete the network settings. ( 18)
• Connect the device to be used to the
same network as this unit.
• To use Windows Media
- Add the contents and folder to the
libraries of the Windows Media
11 or 12, or a smartphone, etc.
- Playlist of Windows Media
play back only the contents that are
stored in the libraries.
- To use Windows Media
streaming, you need to configure it in
advance.
Playing back content stored on the
DLNA server by controlling it from
this unit
1 Press [NET] to select "DMP".
• The server selection screen will be displayed.
• You can also select the input source by
turning the input selector knob on the unit.
2 Press [ ], [ ] to select a DLNA server
on the network, and then press [OK].
• The folder/content selection screen will be
displayed. Repeat this step to make further
selections.
• Folders/content may be displayed in
different order from the order on the server,
depending on its specifications.
3 Press [ ], [ ] to select an item and
then press [OK].
Note
• The connected server and its contents may
not be displayed properly depending on its
condition. (e.g. soon after adding the contents
to the server, etc.)
Please try again later. For details, refer to the
operating instructions of the device.
24
® Player
Player
®
Player can
®
Player for
®
PHONES 5V 2.1A
Operations during playback
Stop
Pause
• Press again to restart play.
Skip
Search
Viewing
available [INFO]
information
Repeat playback
"Repeat"
1 Press [MENU].
2 Press [ ], [ ] repeatedly to select
"Repeat" and then press [OK].
3 Press [ ], [ ] to select an item and
then press [OK].
1-Track:
Only plays the selected track. ("1
displayed.)
All:
All tracks are repeated. ("
• Setting is available even when the input source
is switched to "USB" ( 30).
VOLUME
INPUT SELECTOR
" is
" is displayed.)