Table Of Contents - Andatech PRODIGY User Manual

INTRODUCTION
Thank you for purchasing an Andatech® Prodigy
The Andatech® Prodigy
S
to detect ethyl alcohol from a valid breath sample.
It uses an electrochemical fuel cell to measure the
concentration of alcohol in the breath sample expelled from a
human subject. If alcohol is present, a corresponding voltage is
generated from the fuel cell, which is proportional to the alcohol
content of the sample provided by the human subject. This
voltage is then sent to the CPU and converted to the subject's
BAC (blood alcohol concentration) which is then displayed.
PREPARATION
Gently pull down the battery compartment cover to remove it.
Insert fresh alkaline batteries (4 x AA), checking that the + and
- on each battery are aligned according to the polarity diagram
inside.
Carefully replace the battery compartment cover.
.
S
is a state-of-the-art instrument used
CONTENTS
DEVICE FEATURES .............................................3
OPERATING INSTRUCTIONS
TEST RECORDS ...................................................8
SETTINGS .............................................................9
CONDITIONS FOR TESTING
PRINTER .............................................................12
TROUBLESHOOTING
DISCLAIMERS ....................................................16
WARRANTY DETAILS
PRODUCT REGISTRATION
..............................4
.............................11
........................................15
........................................17
...............................19