Memory; One Touch Setting - Medeli M-10 Instruction Manual

Memory

There are 4 memories for storage.
1.
Press and hold [STORE], press [M1](or [M2]-[M4])
meanwhile. The data will be stored into M1 (M2-M4).
2.
The data which can be stored into the memory are as
follows:
VOICE DATA
VOICE:VOICE 1, VOICE 2;
VOICE EFFECT:TOUCH ON/OFF, SUSTAIN ON/OFF
TRANSPOSE, OCTAVE, SPLIT POINT;
ACCOMP DATA
STYLE NUMBER, TEMPO, A.B.C ON/OFF, NORMAL/
VARIATION STATUS.

One Touch Setting

One Touch Setting is a powerful and convenient
function that allows you to reconfigure all set-
tings instantly with the touch of a single button.
In this function, 4 types of parameters (M1~M4)
will be loaded for operating the current style.
1. Press [O.T.S.] button to turn this mode on and the
O.T.S. flag on the LCD will be lightened.
Press any of the[M1] ~ [M4] buttons, the relative
type of the parameter will be loaded according to the
current style.
The keyboard will turn the A.B.C. mode on automatically
while the O.T.S. is on.
2. Press any of the M1-M4 buttons, which is corresponded
to your desired setting.
Press [O.T.S.] button again to turn off the O.T.S. Mode.
3.
20
M1
STORE
LESSON 1
LESSON 2
LESSON 3
A.B.C.
O.T.S.
，
NOTE:
If the current data is different from the
current memory data, the corresponding
memory flag on the LCD will flash.
The memory data will change to its default
after power off.
M1
STORE
LESSON 1
LESSON 2
LESSON 3
A.B.C.
O.T.S.
ONE TOUCH SETTING
M2 M3 M4
M1 M2 M3 M4
ONE TOUCH SETTING
M3
M2 M4
M1 M2 M3 M4
O.T.S.
RIGHT
LEFT
DUAL
TOUCH
O.T.S.
RIGHT
LEFT
DUAL
TOUCH