Write Data Storage Format Identifier (Dsfid) To Tag; Write Electronic Article Surveillance (Eas) Bit; Read And Feedback Tag Information To Host - Datamax-ONeil I-Class User Manual

STX KtD

Write Data Storage Format Identifier (DSFID) to Tag

This command writes the DSFID data to the tag.
Syntax: <STX>KtDabcc
a
Where:
b
cc
<STX>KtD91C3[CR]
Sample:
The sample writes 0xC3 DSFID byte, locking value, retrying nine times, if necessary.
STX KtE

Write Electronic Article Surveillance (EAS) Bit

This command writes the EAS bit for Philips ISO tags.
Syntax: <STX>KtEabcc
a
Where:
b
cc
<STX>KtE9004[CR]
Sample:
The sample writes the EAS bit for Philips (0x04), retrying nine times, if necessary.
STX KtH

Read and Feedback Tag Information to Host

This command returns the tag info to host.

Note: This command only works when the Data Flag for the tag is 0x0F (i.e., when the tag contains
DSFID, AFI, VICC and IC data.
<STX>KtH
Syntax:
Sample Feedback: DATA FLAG: 0x0F
TAG ID: E004010000751412
DSFID: 0xE3
AFI: 0x01
NUM BLK: 0x1B
BLK SIZ: 0x03
IC REF: 0x01
- The number of retry attempts, 0-9.
- Lock the Data Storage Format Identifier (DSFID) after writing:
0 = No Protection
1 = Write Protect
- Two character DFSID value representing one byte.
- The number of retry attempts, 0-9.
- Electronic Article Surveillance (EAS) option:
0 = Set EAS
1 = Reset EAS
2 = Test EAS
- Two character Manufacturer's Code, representing one byte.
11