Canon imagePROGRAF iPF9000S User Manual page 76

Control Panel
Maintenance
Setting Item
Repl. maint cart
Replace P.head
Change Cutter
Move Printer
60 Printer Parts
When replacing the Maintenance Cartridge, choose Yes and follow the
instructions on the screen. (→P.730)
Not displayed during a warning message that the remaining Maintenance
Cartridge capacity is low.
When replacing the Printhead, choose Yes and follow the instructions on the
screen. (→P.719)
When replacing the Cutter Unit, choose Yes and follow the instructions on the
screen. (→P.727)
You can also reset the cut counter after the Cutter Unit is replaced.
When transferring the printer to another location, follow the instructions on the
screen. (→P.745)
Description, Instructions