Canon imagePROGRAF iPF9000S User Manual page 186

Media take-up unit
The following list identies Weight Roll and Weight Flange you can use. Color Label is applied
to each Weight Roll.
Weight Roll
B2 Width: 515.0 mm (20.3 in)
B1 Width: 728.0 mm (28.7 in)
B0 Width: 1,030.0 mm (40.6 in)
A1 Width: 594.0 mm (23.4 in)
A0 Width: 841.0 mm (33.1 in)
431.8 mm (17 in)
609.6 mm (24 in)
762.0 mm (30 in)
914.4 mm (36 in)
1,066.8 mm (42 in)
1,117.6 mm (44 in)
1,270.0 mm (50 in)
1,371.6 mm (54 in)
1,524.0 mm (60 in)
Weight Flange
Glossy Photo Paper, Semi-Glossy Photo Paper, Heavyweight Glossy
Photo Paper, Heavyweight SemiGlossy Photo Paper, Fine Art Photo
Paper, Fine Art Heavyweight Photo Paper, Fine Art Textured Paper,
Canvas Matte, Fine Art Block Print, Fine Art Watercolor, Proong
paper, Coated Paper, Heavyweight Coated Paper, Extra Heavyweight
Coated Paper, Colored Coated Paper, Synthetic Paper, Adhesive
Synthetic Paper, Backprint Film, Backlit Film, Flame-Resistant Cloth,
Fabric Banner, Thin Fabric Banner
Premium Matte Paper
*1: If you cannot retract stiff paper well using Weight Flange 1 or if the diameter of the retracted paper
is wider than the Rewind Spool, use Weight Flange 2. When using Weight Flange 2, adjust the
paper feed amount by executing Auto Band Adj. (→P.682)
Note
•
Do not use combinations other than those identied here.
•
Insert the Weight Flange and Weight Joint rmly on the Weight Roll.
•
Use identical Weight Flanges on the left and right ends. Insert matching Weight Flanges (1 or
2) on both ends of the Weight Roll.
•
Keep unused Weight Roll, Weight Joint, and Weight Flange handy by putting them in the box and
putting the box under the Stand.
170 Handling Paper
Roll Width
Roll Type
Weight Roll to Use
"D"
"A"+"E"
"A"+"G"
"E"
"B"+"E"
"C"
"E"
"B"+"D"
"G"
"C"+"E"
"D"+"E"
"D"+"F"
"E"+"F"
"E"+"G"
Weight Flange to Use
Weight Flange 1 (*1)
Weight Flange 2