Canon imagePROGRAF iPF9000S User Manual page 517

Setting Item
D
Fit Paper Size
E
Fit Roll Paper Width
F
Scaling
G
Paper Size
H
Orientation
K
Rotate Page 90 degrees (Conserve
Paper)
L
Paper Source
M
Roll Paper Width
N
Auto Cut
P
Output Method
O
Size Options
S
Defaults
Scales the document image to match the paper size.
Scales the document image to match the roll width.
Resizes the document image based on a specied scaling
value. Enter a value in a range of "5-600."
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes".
(→P.113)
Choose the printing orientation.
Making the Original Orientation Match the Paper Orientation
(→P.443)
Activate this setting to rotate the document image by 90
degrees before printing.
Conserving Roll Paper by Rotating Originals 90 Degrees
(→P.416)
Choose the media source, as desired.
Options displayed in the list vary depending on the selection in
Media Type in the Main sheet.
Choose the roll width.
For details on available roll widths, see "Paper Sizes". (→P.113)
You can activate or deactivate automatic cutting and printing of
cut lines, as desired. Click to display the Automatic Cutting
Settings dialog box.
A
Under Automatic Cutting, you can specify Yes or No and
Print Cut Guideline.
Cutting Roll Paper After Printing (→P.457)
Click to display the Output Method dialog box, which enables
you to complete the Output Method and Name of data to
be saved settings.
Click to display the Paper Size Options dialog box, which
enables you to register additional paper sizes or select the size
system for use.
Restores all settings on the sheet to the default values.
Description
Windows Software 501
Printer Driver