Canon imagePROGRAF iPF9000S User Manual page 745

9.
Holding the new Cutter Unit by the Lock Lever (a) and grip (b), push it from the direction of
(c) onto the Carriage until it clicks into place.
Important
•
After installing the Cutter Unit, hold it only by the grip (b) and pull the Cutter Unit forward to make
sure it does not come off. If the Cutter Unit comes off, it may damage the printer.
10.
Close the Top Cover.
The Carriage moves into position and a conrmation message is displayed regarding resetting
the cut counter.
11.
Press the OK button.
The printer now goes online.
Cutter Unit
Maintenance 729