Canon imagePROGRAF iPF9000S User Manual page 606

Network Setting
Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1.
Start the web browser and enter the following URL in the Location (or Address) box to display
the RemoteUI page.
http://"printer IP address or name"/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Information in the Device Manager menu at left to display the Information page.
5.
To display the relevant settings page, click Edit in the upper-right corner of Device Information
or Security, depending on what information you want to specify.
6.
Refer to the table of settings for device information, security, and email notication as you
complete these settings.
Device Information Settings
Device Name
Location
Administrator
Phone
Comments(E-mail)
Security Settings
Old Password
New Password
Conrm
Besides entering a password, you can specify other security-related information, such as IP
address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or
IPP and FTP authentication settings.
7.
Click OK to activate the settings.
590 Network Setting
Item
Enter a device name.
(0-32 characters)
Enter the location where the device is installed.
(0-32 characters)
Enter the administrator's name.
(0-32 characters)
Enter the administrator's contact information.
(0-32 characters)
Enter any comments regarding the administrator.
(0-32 characters)
Item
Enter the current device password.
(0-14 characters)
Enter the new password.
(0-14 characters)
Enter the new password again to conrm it.
(0-14 characters)
Details
Details
Default Setting
blank
blank
blank
blank
blank
Default Setting
blank
blank
blank