Choosing Paper For Printing; Choosing A Paper For Printing; Media Type - Canon imagePROGRAF iPF9000S User Manual

Choosing Paper for Printing

Choosing Paper for Printing

Choosing a Paper for Printing

Choosing the right paper for your particular printing application will give you the best printing results.

Media type

The printer and printer driver offer print settings optimized for various paper characteristics.
Note
•
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.108)
•
The types of paper indicated in the printer driver and related software (as well as on the Control
Panel) are updated when you install the Media Conguration Tool from the User Software CD-ROM
or if you change paper information by using the Media Conguration Tool. For information about the
Media Conguration Tool, see the Media Conguration Tool Guide (Windows) or Media Conguration
Tool Guide (Macintosh).
•
An error message is displayed on the printer Control Panel if the type of paper as specied in the printer
driver does not match the type specied on the printer. Although you can print under these conditions,
the printing results may not be suitable.
If the paper type is not listed for selection
If the type of paper loaded cannot be selected, try specifying glossy paper or proong paper as a special
paper (Special 1 to Special 5, in this order). BK (Black Ink) is used as the black ink. Try specifying other types
of paper as Special 6 to Special 10. MBK (Matte Black Ink) is used as the black ink. Note that higher numbers
in this setting enable more vivid colors but may also cause colors to run together.
For instructions on specifying the type of paper before printing, refer to the following topics.
•
Selecting the Paper Type (Roll) (→P.261)
•
Selecting the Paper Type (Sheet) (→P.262)
260 Enhanced Printing Options