Removing A Roll From The Roll Holder - Canon imagePROGRAF iPF9000S User Manual

Removing a Roll from the Roll Holder

1.
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at
the position indicated (b), remove it from the Roll Holder.
2.
Remove the roll from the Roll Holder.
Important
•
After removal, store the roll in the original bag or box, away from high temperature, humidity, and
direct sunlight. If paper is not stored properly, the printing surface may become scratched, which
may affect the printing quality when you use it again.
Handling rolls
Handling Paper 129