14
ELECTRICAL SYSTEM
14.12
Changing the brake light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Remove nuts
rear.
100599-10
–
Pull bulb sockets
–
Pull bulbs
–
Insert new bulbs into the sockets.
Tail light (W5W / socket W2.1x9.5d) (
–
Insert the bulb sockets into the tail light.
–
Check the lighting function.
–
Position the tail light. Mount and tighten the nuts with the washers.
Guideline
100650-10
Nut, tail light
at the bottom of the rear fender and pull out the tail light toward the
1
out of the tail light.
2
out of the sockets.
3
p. 202)
M6
8 Nm (5.9 lbf ft)
146