19
STORAGE
19.2
Preparing for use after storage
–
Cover the motorcycle with a tarp or cover that is permeable to air.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Raise the vehicle off of the center stand. (
–
Recharge the battery.
–
Install the battery.
–
Set the clock. (
–
Refuel. (
–
Perform checks and maintenance measures when preparing for use. (
–
Take a test ride.
401059-01
x
(
p. 134)
x
(
p. 133)
p. 42)
p. 72)
p. 87)
p. 62)
182