KTM 990 Adventure Baja Owner's Manual page 164

15 COOLING SYSTEM
–
Ensure that the drain plug on the radiator and the water pump cover are tightened.
–
Remove bleeder screw
B00896-10
–
Position the vehicle as shown and secure it against rolling. Height difference
be reached.
Guideline
Height difference
Info
To make sure that all of the air can escape from the cooling system, raise the
front of the vehicle. A poorly bled cooling system is less effective at cooling and
the engine can overheat.
400663-10
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten the bleeder screw immediately.
Alternative 1
Coolant (
Alternative 2
Coolant (mixed ready to use) (
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Lean the vehicle on the side stand.
B00897-01
.
1
A
p. 211)
p. 211)
50 cm (19.7 in)
162
must
A