Using The Touch Control Sensors; Switching The Appliance On; Select Cooking Zone And Heat Setting - Samsung NZ64H57 Series User Manual

uSINg tHe toucH coNtrol SeNSorS

To operate the touch control sensors, touch the desired panel with
the tip of your pointed finger until the relevant displays illuminate or
go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when
operating the appliance. If your finger is too flat on the panel, an
adjacent sensor may be actuated as well.

SWItcHINg tHe applIaNce oN

1. The appliance is switched on using the
on/off control
Touch the on/off control
approximately 1~2 seconds.
The digital displays will show .
After the on/off control
switch on your appliance, a heat setting must be selected
within approximately 20 seconds. Otherwise, the appliance will
switch itself off for safety reasons.

Select cookINg ZoNe aNd Heat SettINg

1. For selecting the cooking zone, touch
the corresponding cooking zone's
sensor.
2. For setting and adjusting the power
level, touch the heat setting selectors.
The default level is set to 15 when selecting the cooking zone.
To keep food warm, select an appropriate cooking zone and
tap the slider bar under Keep warm
NZ64H57479K_EU_DG68-00559A-01_EN.indd 24
sensor.
sensor for
sensor has been actuated to
English - 24 English - 24
approx
1~2 sec.
.
2015-01-19 2:19:46