Table of Contents
Advertisement
Available languages
Available languages
Hob use
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired
function is activated.
Ensure that you are touching only one sensor panel when operating the appliance.
If your finger is too flat on the panel, an adjacent sensor may be actuated as well.
Maximum power limit function
This function allows you to adjust the maximum power of the unit.
18 English
NZ63K7777BK_ET_DG68-00803A-04_EN.indd 18
1.
Keep the power off.
2.
Touch the Lock control
sensor (for
approximately 3 seconds) to turn on the
child safety lock.
Touch the Complete Timer Control
3.
for approximately 3 seconds.
4.
Touch the Timer Control
sensor for
approximately 3 seconds.
5.
6.
NOTE
•
In 3000 W low-power mode, the Boost (P) function is not available with Flex
Zone.
•
In 3000 W, 4000 W low-power mode, the heat setting will be adjusted
automatically.
When your control panel looks like the
picture on the left side, you can adjust
the power using the (
or
) Heat
setting selectors. (3000 W, 4000 W,
7200 W)
Touch the On/Off control
sensor to
end the setting.
2017-05-26
11:14:47
Advertisement
Chapters
Table of Contents
