Using The Touch Control Sensors; Switching The Appliance On; Select Cooking Zone And Heat Setting - Samsung NZ63K5727BK User Manual

NOTE
Do not use one piece of cookware on both the left and
right cooking zones.

Using the touch control sensors

To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired
function is activated.
Ensure that you are touching only one sensor panel when operating the appliance.
If your finger is too flat on the panel, an adjacent sensor may be actuated as well.

Switching the appliance on

NOTE
After the On/Off control sensor has been actuated to switch on your appliance,
a heat setting must be selected within approximately 20 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
NZ63K5727BK_EF_DG68-00796A-00_EN.indd 17
The appliance is switched on using the On/
Off control sensor.
Touch the On/Off control sensor for
approximately 1 ~ 2 seconds.
The digital displays will show .

Select cooking zone and heat setting

1.
2.
NOTE
The default level is set to 15 when selecting the cooking zone.
NOTE
If more than one sensor is pressed for longer than 8 seconds,
heat setting display.
For selecting the cooking zone, touch
the corresponding cooking zone's
sensor.
For setting and adjusting the power
level, touch the Heat setting sensor.
will show in the
English 17
3/2/2016 1:56:56 PM