Hard Drive - HP ProBook 450 G2 Maintenance And Service Manual

Hard drive

Description
Hard drives
1.5-TB, 5400-rpm, 9.5 mm
750-GB, 7200-rpm (HP 450 model only)
750-GB, 5400-rpm
500-GB, 7200-rpm
500-GB, 5400-rpm
500-GB, 5400-rpm, 7 mm, hybrid (8-GB SSD)
320-GB, 5400-rpm
Solid-state drives
256-GB Solid-state drive, TLC, for use in HP 450 models
128-GB Solid-state drive, TLC, for use in HP 450 and HP 455 models
128-GB Solid-state drive for use in HP 450 models
128-GB Solid-state drive for use in HP 455 models
120-GB Solid-state drive, M.2, for use in HP 450 models
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the large service door (see
To remove a hard drive:
1. Remove the 4 Phillips PM2.5×3.0 screws (1) that secure the hard drive to the chassis.
2. Slide the hard drive (2) away from the center of the computer to disengage it from the connector.
Battery on page 36).
Service door on page 37).
Component replacement procedures
Spare part number
747375-001
778191-001
778190-001
778189-001
778186-001
732000-001
645088-001
817630-001
822214-001
778175-001
773069-001
768469-001
39