HP ProBook 450 G2 Maintenance And Service Manual page 52

Hide thumbs Also See for ProBook 450 G2:
Table of Contents

Advertisement

3.
Pull the plastic tab (3) to remove the hard drive from the bay.
4.
To remove the hard drive cover and bracket from the hard drive, lift the Mylar cover up off the drive (1),
remove the 4 Phillips PM3.0×3.0 screws (2) that secure the bracket to the drive, and then lift the bracket
up and off the hard drive (3).
Reverse this procedure to install a hard drive.
40
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 455 g2

Table of Contents