Kohler 8.5RES Service page 65

Continued from Figure 5-13:
Press:
Note: Be sure to save your settings before exiting the configuration mode. The controller reverts to
the last saved settings when the master switch is moved to the OFF/RESET position.
* Shaded boxes show which character in the controller display changes for each adjustment. X in the
examples above denotes any number from 0 to 9. The actual values may vary from model-to-model.
Figure 5-14 Output Voltage and Frequency Adjustments, Continued
TP-6196 10/09
Downloaded from www.Manualslib.com
To enter engine governor speed coarse adjustment
mode. (Parameter 4P)
To raise or lower the engine speed in large
or
increments.
To enter engine governor speed fine
adjustment mode. (Parameter 4P)
To raise or lower the engine speed in smaller
or
increments.
To enter engine governor stability (gain) coarse
adjustment mode. (Parameter 5P)
To raise or lower the engine governor stability (gain)
or
in large increments.
To enter engine governor stability (gain) fine
adjustment mode. (Parameter 5P)
To raise or lower the engine governor stability (gain)
or
in smaller increments.
To enter SAVE mode. Go to Figure 5-15.
manuals search engine
Display : *
4 P
4 P
5 P
5 P
S A V E
Section 5 ADC-RES and DC-RET Controller
x x
x x
x x
x x
65