Adjusting The Ignition Curve To The Fuel Quality - KTM 990 SupermotoR Owner's Manual

TUNING THE ENGINE

Adjusting the ignition curve to the fuel quality

15.4
Preliminary work
–
Switch off the ignition by turning the ignition key to the OFF
–
Remove the seat. ( p. 70)
To activate the ignition curve for low octane fuel:
Note
Engine failure Low-quality fuel damages the engine.
–
Operate the vehicle with fuel with an octane rating below 95 (ROZ 95/RON 95/PON 91) for no more than one tank full.
–
The ignition curve must be adjusted to low octane fuel.
–
Disconnect the plug-in connector.
Plug-in connector disconnected – Fuel with an octane rating of 80 to 94 (RON) can be used for one tank full. (
Activate the ignition curve for fuel with an octane rating of 95 or higher (ROZ 95/RON 95/PON 91):
–
Connect the plug-in connector.
Plug-in connector connected – Fuel with an octane rating of 95 or higher can be used. (
Subsequent work
–
Mount the seat. ( p. 71)
position.
p. 149)
p. 149)
150