Table of Contents
Advertisement
WHEELS, TIRES
–
Slide the sleeve onto the wheel speed sensor
Mount and tighten screw
Guideline
Screw, wheel speed sensor
–
Fasten the speed sensor cable in the bracket.
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws
101587-11
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Release the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
.
4
M6
on both brake calipers but do not tighten yet.
5
on both brake calipers.
5
M10x1.25
and push them into the hole together.
3
6 Nm
Loctite
®
(4.4 lbf ft)
Loctite
®
45 Nm
(33.2 lbf ft)
p. 68)
p. 69)
98
243™
243™
Advertisement
Table of Contents
