KTM 990 SupermotoR Owner's Manual page 104

WHEELS, TIRES
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove bushing
seal ring.
Long-life grease (
–
Install the bushing.
B00635-10
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease (
–
Clean the fixing locations on the brake caliper support and swingarm.
x
. Clean and grease the mating surfaces of the bushing and the shaft
1
p. 196)
p. 196)
102