Table of Contents
Advertisement
ELECTRICAL SYSTEM
Changing the turn signal bulb
13.9
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position holes
101146-12
–
Position the headlight mask. Mount and tighten screws
Guideline
Remaining chassis screws
–
Check that the lighting is functioning properly.
101145-10
onto holding lugs
.
5
2
.
1
M6
10 Nm (7.4 lbf ft)
123
Advertisement
Table of Contents
