Table of Contents
Advertisement
WHEELS, TIRES
Main work
–
Remove screw
–
Remove nut
–
Pull out wheel spindle
with the adjusting screw.
101593-10
–
Push the rear wheel forward as far as possible and take the chain off the rear sprocket.
–
Withdraw the wheel spindle.
–
Pull the rear wheel back until the brake caliper support is suspended freely between the
brake disc and rim.
Warning
Danger of accidents Reduced braking efficiency due to damaged brake discs.
–
Always lay down the wheel in such a way that the brake discs are not dam-
aged.
101594-01
and pull wheel speed sensor
1
. Remove chain adjuster
3
4
to the point where the chain adjuster is no longer in contact
5
out of the hole.
2
.
100
Advertisement
Table of Contents
