Table of Contents
Advertisement
Section 10: Installing the Main Landing Gear
Parts Needed
• Fuselage
• Main landing gear
• Mounting hardware
Step 1. Locate the three mounting holes for the landing gear on
the forward part of the bottom of the fuselage. Look carefully as
the covering may make it difficult to find them. The blind nuts are
already mounted inside the fuselage. Use a hobby knife and
remove the covering from the mounting holes.
Step 2. Trial fit the aluminum main landing gear over the holes
in the fuselage.
26
Tools and Adhesives Needed
• Hobby knife with #11 blade
• Phillips screwdriver
• Felt-tipped pen or pencil
• Locktite
Z-42
®
Step 3. Using the hardware provided, mount the main landing
gear to the fuselage. Apply Locktite Z-42 to the threads of the
screws to help secure them to the blind nuts in the fuselage.
Hide quick links:
Advertisement
Table of Contents
