3) Pwfy-P200Vm-E1-Au - Mitsubishi PWFY-P100VM-E-BU Data Book

(3) PWFY-P200VM-E1-AU

Model
Power source
Heating capacity
(Nominal)
Power input
Current input
Outdoor temp.
Temp. range of
heating
Circulating Water temp.
Inlet Water temp.
Cooling capacity
(Nominal)
Power input
Current input
Temp. range of cooling Outdoor temp.
Circulating Water temp.
Inlet Water temp.
Connectable Total capacity
outdoor unit Model / Quantity
/heat source unit
Sound pressure level (measured in anechoic room)
Diameter of Liquid
refrigerant pipe Gas
Inlet
Diameter of
water pipe Outlet
Field drain pipe size
External finish
External dimension H × W × D
Net weight
Circulating water Operation Volume
Range
R410a
Design pressure
Water
Drawing External
Wiring
Standard attachment Document
Accessory
Optional parts
Remark
Note: *1 Nominal heating conditions (PWFY conditions are indicated in the parentheses.)
<Y/HP (ZUBADAN)/R2-series>
Outdoor Temp. : 7°CDB/6°CWB (45°FDB / 43°FWB)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0 m (0 ft)
(Inlet water Temp 30°C
*2 Nominal cooling conditions (PWFY conditions are indicated in the parentheses.)
<Y/HP (ZUBADAN)/R2-series>
Outdoor Temp. : 35°CDB (95°FDB)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0 m (0 ft)
(Inlet water Temp 23°C
* Due to continuing improvement, the above specifications may be subject to change without notice.
* The unit is not designed for outside installations.
* Please don't use the steel material for the water piping material.
* Please always make water circulate or add the brine to the circulation water when the ambient temperature becomes 0°C or less.
* Please always make water circulate or pull out the circulation water completely when not using it.
* Please do not use groundwater and well water.
*1 kW
*1 kcal / h
*1 BTU / h
kW
A
W.B
W.B
W.B
-
-
-
*2 kW
*2 kcal / h
*2 BTU / h
kW
A
D.B
D.B
D.B
-
-
-
dB<A>
mm(in.)
mm(in.)
mm(in.)
mm(in.)
mm(in.)
mm
in.
kg(lbs)
m /h
3
MPa
MPa
<WY/WR2-series>
Circulating water Temp. : 20°C (68°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0 m (0 ft)
Water flow rate 4.30 m /h) (Inlet water Temp 30°C
3
<WY/WR2-series>
Circulating water Temp. : 30°C (86°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0 m (0 ft)
Water flow rate 3.86 m /h) (Inlet water Temp 23°C
3
1-phase 220-230-240V 50/60Hz
-20~32°C (-4~90°F) R2-series
-20~15.5°C (-4~60°F) Y-series
-25~15.5°C (-13~60°F) HP(ZUBADAN)-series
10~45°C (50~113°F) WR2-series
10~45°C (50~113°F) WY-series
-5~46°C (23~115°F) R2-series
-5~46°C (23~115°F) Y-series
-5~43°C (23~110°F) HP(ZUBADAN)-series
10~45°C (50~113°F) WR2-series
10~45°C (50~113°F) WY-series
50~100% of outdoor unit/heat source unit capacity
PUHY-(E)P
PUHY-HP
PURY-(E)P
800 (785 without legs) × 450 × 300
31-1/2" (30-15/16" without legs) × 17-3/4" × 11-13/16"
Installation Manual, Instruction Book
Strainer, Connecter, Heat insulation material, 2 × Connector sets, Expansion joint, wire, Flow switch × 1set
Solenoid valve kit: PAC-SV01PW-E
Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and
other items shall be referred to the Installation Manual.
Water flow rate 4.30 m /h)
3
Water flow rate 3.86 m /h)
3
* Install the unit in an environment where the
wet bulb Temp. will not exceed 32°C.
* The water circuit must use the closed circuit.
* Please do not use it as a drinking water.
- 5 -
PWFY-P200VM-E1-AU
25.0
21,500
85,300
0.015
0.068 - 0.065 - 0.063
10~40°C (50~104°F)
22.4
19,300
76,400
0.015
0.068 - 0.065 - 0.063
10~35°C (50~95°F)
Y(S)JM-A(1)(-BS)
•
Y(S)HM-A(-BS)
•
PQHY-P Y(S)HM-A
•
Y(S)JM-A(1)(-BS)
•
PQRY-P Y(S)HM-A
•
29
Φ9.52 (Φ3/8") Brazed
Φ19.05 (Φ3/4") Brazed
PT 1 Screw
PT 1 Screw
Φ32 (1-1/4'')
NO
38 (84)
1.8~4.30
4.15
1.00
WKB94L763
WKE94C230
Unit converter
kcal = kW × 860
×
BTU/h = kW
cfm = m /min × 35.31
3
lbs = kg / 0.4536
* The specification data is subject
to rounding variation.
3,412