Publication Record; Document Conventions - Tait TM9300 DMR Installation Manual

Publication Record

Document Conventions

25W
6 Preface
Issue Publication Date
01 September 2012
02 December 2012
03 November 2013
04 May 2014
05 December 2015
Please follow exactly any instruction that appears in the text as an 'alert'.
An alert provides necessary safety information as well as instruction in the
proper use of the product. This manual uses the following types of alert:
Warning
This alert is used when there is a hazardous situation
which, if not avoided, could result in death or serious injury.
Caution This alert is used when there is a hazardous situation which,
if not avoided, could result in minor or moderate injury.
Notice This alert is used to highlight information that is required to
ensure procedures are performed correctly. Incorrectly performed pro-
cedures could result in equipment damage or malfunction.
This alert is used to highlight significant information that may be
required to ensure procedures are performed correctly, or draw your
attention to ways of doing things that can improve your efficiency or
effectiveness.
Within this manual, the following symbols are used to highlight differences
between radios with a transmit power of more than 25W and radios with a
transmit power of 25W:
This symbol highlights information that is relevant to radios with a transmit
power of 30-50W.
This symbol highlights information that is relevant to radios with a transmit
power of 25W.
Description
First release.
TM9400 added.
Hand-held control head added
Caution about using Y-type breakout cable added
Information added about using an analog
channel to check TM9300 forward and reflected
power
Remote head extender upgrade kits added.
Component names to configure an external alert
device changed.
TM9300/TM9400 Installation Guide
© Tait Limited December 2015