Stairville MH-X25 LED Spot User Manual page 34

Operation
Pan range
Tilt range
System reset
34
Repeatedly press [MODE/ESC] until the display shows 'PA54' . Now use [UP] and [DOWN] to
determine the Pan range. Choose between 'PA54' (Pan range = 540°), 'PA36' (Pan range
= 360°) and 'PA18' (Pan range = 180°).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Repeatedly press [MODE/ESC] until the display shows 'ti27' . Now use [UP] and [DOWN] to
determine the Tilt range. Choose between 'ti27' (Tilt range = 270°), 'ti18' (Tilt range = 180°)
and 'ti 9' (Tilt range = 90°).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Repeatedly press [MODE/ESC] until the display shows 'rESt' . Press [ENTER] to reset the servo-
motors for the axes of movement, the Gobo wheel and the Colour wheel to their home posi‐
tion (mechanical reset).
moving head