Stairville MH-X25 LED Spot User Manual page 30

Operation
DMX address
30
Repeatedly press [MODE/ESC] until the display shows 'dxxx' . Now you can set the number of
the first DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a
value between 1 and 512.
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] or wait a minute.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various modes.
Mode
6 channels
12 channels
moving head
Highest possible DMX address
507
501