Canon W7200 Manual page 55

Color Uneven in Printed Image
Occasionally uneven colors may occur during a complicated print job when the
printhead stops but printing continues to execute. In such a case, you can prevent this by
selecting Send All Print Data as Batch to Printer which will send the print job to the
printer only after all the print data has been created.
Leading Edge of Printed Image is too dark
If you see differences in the density in some areas of the printed image, especially at the
leading edge, perform the following setting.
On the Device Setting panel of the print dialog box, click the SSC Adjustment check
box on. If selecting Level1 and printing does not solve the problem, select Level2.
Changing this setting could affect the hues of the colors in the entire image, so be
sure to pay attention to any changes in the image color as you adjust this setting.
Printout is Not Sharp 2/2