Canon MG6400 series Online Manual page 221

1. Make sure that the machine is turned on.
2. Select ECO settings on the HOME screen.
LCD and Operation Panel
3. Select Energy saving settings, then press the OK button.
4. Use the button to change the setting item, use the
then use the OK button to confirm the selection.
1. Auto power off
Specifies the length of time to turn the machine off automatically when no operation is made or
no printing data is sent to the machine.
Note
• The Auto power off setting is invalid under the following conditions.
• When using the machine via a network and the network connection is enabled
You can check the connection status from WLAN setting list in Confirm LAN settings
under LAN settings.
• When Writable from USB PC or Writable from LAN PC is selected for Read/write
attribute under Device user settings.
2. Auto power on
Selecting ON enables the machine to turn on automatically when a scanning command from a
computer or printing data is sent to the machine.
button to change the setting,
221