Canon MG6400 series Online Manual page 212

Note
• You cannot change this setting with the memory card inserted in the card slot.
◦ WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 8, Windows
7, and Windows Vista).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is activated, the printer icon is displayed on the Network Explorer in Windows
8, Windows 7 and Windows Vista.
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected devices.
◦ LPR protocol setting
Activates/deactivates the LPR setting.
◦ PictBridge communication
Setting items for printing from a PictBridge (Wireless LAN) compliant device.
Enable/disable communication
Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.
Timeout setting
Specifies the timeout length.
◦ Wireless LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It allows
you to save electricity.
Note
• Depending on the access point you are using, discontinuous reception may not be activated
even though Enable is selected.
• Discontinuous reception is activated only while the machine is on standby. (The LCD is in the
screen saver mode.)
212