Lan Settings - Canon MG6400 series Online Manual

LAN settings

• WLAN active/inactive
Activates/deactivates wireless LAN.
• Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
• You can also enter this setting menu by selecting Wireless LAN setup on the HOME screen. In
this case, activate wireless LAN.
When this menu is selected, the machine starts searching for a WPS-compatible access point. If the
machine detects the access point, follow the on-screen instructions to set up wireless LAN. If an access
point is not detected or if you select another setup method, select one of the setup methods below.
◦ Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the
machine.
◦ WPS
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push
button method or PIN code method according to the method your access point supports, then
follow the on-screen instructions.
◦ Other setup
Select Advanced setup if you perform settings by entering the access point's settings directly on
the machine. Select Cableless setup if you specify the settings of the access point information to
the machine directly from a device (such as a smartphone) without operating the access point.
Follow the on-screen instructions of the connecting device for the setup procedure.
• Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD. You can print the list from this
setting menu.
◦ WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Connection
SSID
Communication mode
Channel
Wireless LAN security
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-
PSK(TKIP)/WPA2-PSK(AES)
210
Setting