Cleaning The Paper Feed Roller - Canon MG6400 series Online Manual

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed
properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so
perform this only when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Select Roller cleaning.
(1) Select
LCD and Operation Panel
The setup menu screen will appear.
(2) Select
The Maintenance screen will appear.
(3) Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
(4) Select Yes, then press the OK button.
3. Clean the paper feed roller without paper.
(1) Follow the message to remove any paper from the front tray.
(2) Press the OK button.
The paper feed roller will rotate as it is cleaned.
4. Clean the paper feed roller with paper.
Setup on the HOME screen.
Maintenance, then press the OK button.
190