Page 1 MG6400 series Online Manual Scanning English...
Page 2: Table Of Contents
Contents Scanning............4 Scanning from a Computer.
Page 3 Basic Mode Tab............130 Advanced Mode Tab.
Page 4: Scanning
Scanning Scanning from a Computer Scanning with IJ Scan Utility Scanning with Application Software that You are Using (ScanGear) Useful Information on Scanning IJ Network Scanner Selector EX Menu and Setting Screen Other Scanning Methods Placing Items (When Scanning from a Computer) Scanning from the Operation Panel of the Machine Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine Basic...
Page 5: Scanning From A Computer
Scanning from a Computer Scanning with IJ Scan Utility Scanning with Application Software that You are Using (ScanGear) Useful Information on Scanning IJ Network Scanner Selector EX Menu and Setting Screen Other Scanning Methods Placing Items (When Scanning from a Computer)
Page 6: Scanning With Ij Scan Utility
Scanning with IJ Scan Utility What Is IJ Scan Utility (Scanner Software)? Starting IJ Scan Utility Easy Scanning with Auto Scan Basic Scanning Photos Scanning Documents Scanning with Favorite Settings Scanning Items Larger than the Platen (Image Stitch) Scanning Multiple Items at One Time Saving after Checking Scan Results Sending Scanned Images via E-mail Extracting Text from Scanned Images (OCR)
Page 7: What Is Ij Scan Utility (Scanner Software)
What Is IJ Scan Utility (Scanner Software)? IJ Scan Utility is an application that allows you to easily scan photos, documents, etc. You can complete from scanning to saving at one time by simply clicking the corresponding icon in the IJ Scan Utility main screen. What You Can Do with IJ Scan Utility Scan Easily according to Purposes You can scan by simply clicking an icon such as Auto to scan easily, Photo to scan with...
Page 8 Important Some functions are available only when My Image Garden is installed. Note Refer to "Settings Dialog Box" for how to set the applications to integrate with.
Page 9: Starting Ij Scan Utility
If IJ Scan Utility is not displayed on the Start screen, select the Search charm, then search for "IJ Scan Utility". Windows 7/Windows Vista/Windows XP: From the Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility to start IJ Scan Utility.
Page 10: Easy Scanning With Auto Scan
Easy Scanning with Auto Scan You can scan easily by automatically detecting the item type. Important The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver) and scan again.
Page 11 Scanning with Favorite Settings...
Page 12: Scanning Photos
Scanning Photos You can scan photos placed on the platen with settings suitable for photos. Place the photo on the platen. Placing Items (When Scanning from a Computer) Start IJ Scan Utility. Click Settings..., select the Settings (Photo Scan) dialog box, then set the paper size, resolution, etc.
Page 13: Scanning Documents
Scanning Documents You can scan items placed on the platen with settings suitable for documents. Place the item on the platen. Placing Items (When Scanning from a Computer) Start IJ Scan Utility. Click Settings..., select the Settings (Document Scan) dialog box, then set the paper size, resolution, etc.
Page 14: Scanning With Favorite Settings
Scanning with Favorite Settings You can scan items placed on the platen with your favorite settings saved beforehand. This is convenient for saving frequently used settings or when specifying scan settings in detail. Start IJ Scan Utility. Click Settings..., select the Settings (Custom Scan) dialog box, then set the select source, resolution, etc.
Page 15: Scanning Items Larger Than The Platen (Image Stitch)
Scanning Items Larger than the Platen (Image Stitch) You can scan the left and right halves of an item larger than the platen and combine them back into one image. Items up to approximately twice as large as the platen are supported. Note The following explains how to scan from the item to be placed on the left side.
Page 16 Make sure that Scan from Left is selected in Scan Direction. Place the item that is to be displayed on the left side of the screen face- down on the platen. Click Start Scanning Image 1.
Page 17 The first item is scanned and appears in 1. Note Click Cancel to cancel the scan. Place the item that is to be displayed on the right side of the screen face- down on the platen. Click Start Scanning Image 2.
Page 18 The second item is scanned and appears in 2. Note Click Cancel to cancel the scan. Adjust the scanned images as required. Use the Toolbar to rotate or zoom in/out, or drag the images to adjust their positions. Note Select the Adjust cropping frames checkbox to specify the area to be saved. Adjusting Cropping Frames in the Image Stitch Window To scan an item again, select the image in the Preview area or the thumbnail at the top of the screen, then click...
Page 19 The combined image is saved. Note Refer to "Image Stitch Window" for details on the Image Stitch window. You can make advanced scan settings in the Settings (Scan and Stitch) dialog box displayed by clicking Settings..
Page 20: Scanning Multiple Items At One Time
Scanning Multiple Items at One Time You can scan two or more photos (small items) placed on the platen at one time and save each image individually. Important The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver) and scan again.
Page 21 The Settings dialog box appears. Click Custom Scan. Select Select Source according to the items to be scanned.
Page 22 Select Auto scan for Paper Size, then click OK. The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box...
Page 23 Click Custom. Multiple items are scanned at one time. Note Click Cancel to cancel the scan. Scanned images are saved in the folder set for Save in in the corresponding Settings dialog box displayed by clicking Settings..In each Settings dialog box, you can also make advanced scan settings.
Page 24: Saving After Checking Scan Results
Saving after Checking Scan Results You can check the scan results, then save the images to a computer. Important You cannot check the scan results before saving when scanned using Auto scan or the operation panel. Note The screens for scanning photos are used as examples in the following descriptions. Start IJ Scan Utility.
Page 25 Select the Check scan results checkbox, then click OK. The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (Scan and Stitch) Dialog Box Settings (ScanGear) Dialog Box...
Page 26 Change the image order or file save options as required. You can change the image order or file save options in the Save Settings dialog box. Note The default save folders are as follows. Windows 8: My Documents folder Windows 7: My Documents folder Windows Vista: Documents folder Windows XP: My Documents folder Click OK.
Page 27: Sending Scanned Images Via E-Mail
Sending Scanned Images via E-mail You can send scanned images via e-mail. Note The screens for scanning photos are used as examples in the following descriptions. Start IJ Scan Utility. Click Settings..Settings dialog box appears. Click Photo Scan. Select Attach to e-mail in Application Settings, then select an e-mail client.
Page 28 Note You can add e-mail clients to use for attachments from the pull-down menu. If None (Attach Manually) is selected, manually attach scanned and saved images to e-mail. Click OK. The IJ Scan Utility main screen appears.
Page 29 Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Auto Scan) Dialog Box Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (ScanGear) Dialog Box Click Photo.
Page 30: Extracting Text From Scanned Images (Ocr)
Extracting Text from Scanned Images (OCR) Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows). Note You can extract text when scanning via Document, Custom, or ScanGear. The screens for scanning documents are used as examples in the following descriptions.
Page 31 Note For Resolution, only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings. Select Start OCR for Application Settings, then select the application in which you want to display the result. Note When My Image Garden is specified, after the image is scanned, the text in the image is extracted and appears in Notepad (included with Windows).
Page 32 The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (ScanGear) Dialog Box Click Document. Scanning starts.
Page 33 Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi) Slanted documents Documents placed upside down or documents with text in the wrong orientation (rotated characters) Documents containing special fonts, effects, italics, or hand-written text Documents with narrow line spacing Documents with colors in the background of text Documents containing multiple languages...
Page 34: Ij Scan Utility Screens
IJ Scan Utility Screens IJ Scan Utility Main Screen Settings Dialog Box Settings (Auto Scan) Dialog Box Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (Scan and Stitch) Dialog Box Settings (ScanGear) Dialog Box Settings (Save to PC (Auto)) Dialog Box Settings (Save to PC (Photo)) Dialog Box Settings (Save to PC (Document)) Dialog Box...
Page 35: Ij Scan Utility Main Screen
"IJ Scan Utility". Windows 7/Windows Vista/Windows XP: From the Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility to start IJ Scan Utility. You can complete from scanning to saving at one time by simply clicking the corresponding icon.
Page 36 Scan/save settings and the response after scanning can be specified in the Settings (Document Scan) dialog box. • Custom Scans items with your favorite settings and saves the images to a computer. The item type can be automatically detected. Scan/save settings and the response after scanning can be specified in the Settings (Custom Scan) dialog box.
Page 37: Settings Dialog Box
Settings Dialog Box There are three tabs in the Settings dialog box: (Scanning from a Computer), (Scanning from the Operation Panel), and (General Settings). When you click a tab, the view in the red frame switches and you can make advanced settings to functions on each tab.
Page 38 Settings (Attach to E-mail (Document)) Dialog Box Important When the Settings dialog box is displayed from My Image Garden, the (Scanning from the Operation Panel) tab does not appear. When using your scanner or printer with network connection, the Settings (Save to PC (Auto)) dialog box does not appear.
Page 39 Settings (Auto Scan) Dialog Box Click Auto Scan on the (Scanning from a Computer) tab to display the Settings (Auto Scan) dialog box. In the Settings (Auto Scan) dialog box, you can make advanced scan settings to scan by automatically detecting the item type. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 40 Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off Items printed on thin white paper Long narrow items such as panoramic photos Reflective disc labels may not be scanned as expected. Place items to be scanned on the platen correctly.
Page 41 Note You can change the data format from Settings..• Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to save images scanned with Auto Scan.
Page 42 Saves to the folder specified in Save in. Note Specify the application or folder in the Select Application or Select Destination Folder dialog box displayed by selecting Add... from the pull-down menu. • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 43 Settings (Photo Scan) Dialog Box Click Photo Scan on the (Scanning from a Computer) tab to display the Settings (Photo Scan) dialog box. In the Settings (Photo Scan) dialog box, you can make advanced scan settings to scan items as photos. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 44 Important To select Black and White, deselect the Compress scanned images upon transfer checkbox. • Paper Size Select the size of the item to be scanned. When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK.
Page 45 Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format. • Data Format Select the data format in which to save the scanned images. You can select JPEG/Exif, TIFF, or PNG.
Page 46 Select this when you want to use the scanned images as they are in an application that allows you to browse or organize images. You can specify the application from the pull-down menu. • Send to a folder Select this when you also want to save the scanned images to a folder other than the one specified in Save in.
Page 47 Settings (Document Scan) Dialog Box Click Document Scan on the (Scanning from a Computer) tab to display the Settings (Document Scan) dialog box. In the Settings (Document Scan) dialog box, you can make advanced scan settings to scan items as documents. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 48 • Color Mode Select the color mode in which to scan the item. Important To select Black and White, deselect the Compress scanned images upon transfer checkbox. • Paper Size Select the size of the item to be scanned. When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK.
Page 49 • Apply Auto Document Fix Select this checkbox to sharpen text in a document or magazine for better readability. Important Available only when the Compress scanned images upon transfer checkbox is not selected. The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan.
Page 50 Important The following types of documents may not be corrected properly since the text cannot be detected correctly. Documents in which the text lines are inclined more than 10 degrees or the angles vary by line Documents containing both vertical and horizontal text Documents with extremely large or small fonts Documents with small amount of text Documents containing figures/images...
Page 51 Important You cannot select JPEG/Exif when Color Mode is Black and White. When Start OCR is selected in Application Settings, you cannot select PDF or PDF (Multiple Pages). • Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to save images scanned with Auto Scan.
Page 52 Select this when you also want to save the scanned images to a folder other than the one specified in Save in. You can specify the folder from the pull-down menu. • Attach to e-mail Select this when you want to send e-mails with the scanned images attached. You can specify the e-mail client you want to start from the pull-down menu.
Page 53 Settings (Custom Scan) Dialog Box Click Custom Scan on the (Scanning from a Computer) tab to display the Settings (Custom Scan) dialog box. In the Settings (Custom Scan) dialog box, you can make advanced scan settings to scan according to your preference. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 54 Important Item types supported by Auto are photos, postcards, business cards, magazines, newspapers, documents, and BD/DVD/CD. To scan the following types of items, specify the item type or size. You cannot scan correctly with Auto. A4 size photos Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off Items printed on thin white paper Long narrow items such as panoramic photos...
Page 55 Note Only Auto is available when Select Source is Auto. Click Defaults in the screen in which you can specify the paper size to restore the specified settings to the default settings. • Resolution Select the resolution of the item to be scanned. The higher the resolution (value), the more detail in your image.
Page 56 • Sharpen outline Emphasizes the outline of the subjects to sharpen the image. When Select Source is Magazine or Document Note When Color Mode is Black and White, only Reduce gutter shadow, Correct slanted text document, and Detect the orientation of text document and rotate image appear.
Page 57 Note Use ScanGear (scanner driver)'s Advanced Mode tab to correct gutter shadows when scanning non-standard size items or specified areas. Refer to "Gutter Shadow Correction" for your model from Home of the Online Manual for details. • Correct slanted text document Detects the scanned text and corrects the angle (within -0.1 to -10 degrees or +0.1 to +10 degrees) of the document.
Page 58 (2) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format. • Data Format Select the data format in which to save the scanned images.
Page 59 Important This does not appear when Select Source is Auto. When the Settings dialog box is displayed from My Image Garden, this option does not appear. (3) Application Settings Area • Open with an application Select this when you want to enhance or correct the scanned images. You can specify the application from the pull-down menu.
Page 60 Settings (Scan and Stitch) Dialog Box Click Scan and Stitch on the (Scanning from a Computer) tab to display the Settings (Scan and Stitch) dialog box. In the Settings (Scan and Stitch) dialog box, you can make advanced scan settings for scanning items larger than the platen.
Page 61 Note To reduce moire, set Select Source to Magazine. • Color Mode Select the color mode in which to scan the item. • Resolution Select the resolution of the item to be scanned. The higher the resolution (value), the more detail in your image. Resolution •...
Page 62 • Data Format Select the data format in which to save the scanned images. You can select JPEG/Exif, TIFF, PNG, PDF, or PDF (Multiple Pages). Important You cannot select JPEG/Exif when Color Mode is Black and White. • Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and...
Page 63 • Send to a folder Select this when you also want to save the scanned images to a folder other than the one specified in Save in. You can specify the folder from the pull-down menu. • Do not start any application Saves to the folder specified in Save in.
Page 64 Settings (ScanGear) Dialog Box Click ScanGear on the (Scanning from a Computer) tab to display the Settings (ScanGear) dialog box. In the Settings (ScanGear) dialog box, you can specify how to save images when scanning items by starting ScanGear (scanner driver) and how to respond after saving them.
Page 65 Note When PDF or PDF (Multiple Pages) is selected, images up to 9600 pixels x 9600 pixels can be scanned. When the Enable large image scans checkbox is selected in Save Settings, or when Start OCR is selected in Application Settings, you can select JPEG/Exif, TIFF, or PNG.
Page 66 Important When the Settings dialog box is displayed from My Image Garden, this option does not appear. (2) Application Settings Area • Open with an application Select this when you want to enhance or correct the scanned images. You can specify the application from the pull-down menu. •...
Page 67 Settings (Save to PC (Auto)) Dialog Box Click Save to PC (Auto) on the (Scanning from the Operation Panel) tab to display the Settings (Save to PC (Auto)) dialog box. In the Settings (Save to PC (Auto)) dialog box, you can specify how to respond when saving images to a computer after scanning them from the operation panel by automatically detecting the item type.
Page 68 Important The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan. Note Scanning takes longer than usual when you enable this function. (2) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001"...
Page 69 (3) Application Settings Area • Open with an application Select this when you want to enhance or correct the scanned images. You can specify the application from the pull-down menu. • Send to an application Select this when you want to use the scanned images as they are in an application that allows you to browse or organize images.
Page 70 Settings (Save to PC (Photo)) Dialog Box Click Save to PC (Photo) on the (Scanning from the Operation Panel) tab to display the Settings (Save to PC (Photo)) dialog box. In the Settings (Save to PC (Photo)) dialog box, you can specify how to respond when saving images to a computer as photos after scanning them from the operation panel.
Page 71 (2) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format. • Data Format Set from the operation panel.
Page 72 Note Specify the application or folder in the Select Application or Select Destination Folder dialog box displayed by selecting Add... from the pull-down menu. • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 73 Settings (Save to PC (Document)) Dialog Box Click Save to PC (Document) on the (Scanning from the Operation Panel) tab to display the Settings (Save to PC (Document)) dialog box. In the Settings (Save to PC (Document)) dialog box, you can specify how to respond when saving images to a computer as documents after scanning them from the operation panel.
Page 74 Click (Plus) to set the following. • Apply Auto Document Fix Select this checkbox to sharpen text in a document or magazine for better readability. Important Available only when the Compress scanned images upon transfer checkbox is not selected. The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan.
Page 75 Automatically rotates the image to the correct orientation by detecting the orientation of text in the scanned document. Important Only text documents written in languages that can be selected from Document Language in the Settings (General Settings) dialog box are supported. The orientation may not be detected for the following types of settings or documents since the text cannot be detected correctly.
Page 76 • Send to an application Select this when you want to use the scanned images as they are in an application that allows you to browse or organize images. You can specify the application from the pull-down menu. • Send to a folder Select this when you also want to save the scanned images to a folder other than the one specified in Save in.
Page 77 Settings (Attach to E-mail (Photo)) Dialog Box Click Attach to E-mail (Photo) on the (Scanning from the Operation Panel) tab to display the Settings (Attach to E-mail (Photo)) dialog box. In the Settings (Attach to E-mail (Photo)) dialog box, you can specify how to respond when attaching images to an e-mail as photos after scanning them from the operation panel.
Page 78 (2) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001" format. • Data Format Set from the operation panel.
Page 79 Settings (Attach to E-mail (Document)) Dialog Box Click Attach to E-mail (Document) on the (Scanning from the Operation Panel) tab to display the Settings (Attach to E-mail (Document)) dialog box. In the Settings (Attach to E-mail (Document)) dialog box, you can specify how to respond when attaching images to an e-mail as documents after scanning them from the operation panel.
Page 80 Click (Plus) to set the following. • Apply Auto Document Fix Select this checkbox to sharpen text in a document or magazine for better readability. Important Available only when the Compress scanned images upon transfer checkbox is not selected. The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan.
Page 81 Automatically rotates the image to the correct orientation by detecting the orientation of text in the scanned document. Important Only text documents written in languages that can be selected from Document Language in the Settings (General Settings) dialog box are supported. The orientation may not be detected for the following types of settings or documents since the text cannot be detected correctly.
Page 82 Note Specify the e-mail client in the Select Application dialog box displayed by selecting Add... from the pull-down menu. • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 83 Settings (General Settings) Dialog Box Click the (General Settings) tab to display the Settings (General Settings) dialog box. In the Settings (General Settings) dialog box, you can set the product to use, file size restriction on e-mail attachment, language to detect text in images, and folder in which to save images temporarily.
Page 84 • Document Language Select the language for detecting text in images. • Folder to Save Temporary Files Displays the folder in which to save images temporarily. Click Browse... to specify the destination folder. • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 85: Data Format Settings Dialog Box
Data Format Settings Dialog Box Display the Data Format Settings dialog box by one of the following operations. • Click Settings... of Save Settings on each tab of the Settings dialog box • Click Settings... of Save Settings in the Save Settings dialog box that appears after scanning with the Check scan results checkbox selected in the Settings dialog box In the Data Format Settings dialog box, you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to...
Page 86 Compresses the file size when saving, allowing you to reduce the load on your network/server. Important This option does not appear when Data Format on the (Scanning from the Operation Panel) tab of the Settings dialog box is Use Device Setting. Note When Black and White is set for Color Mode on the (Scanning from a...
Page 87: Save Settings Dialog Box
Save Settings Dialog Box Select the Check scan results checkbox in Save Settings of the Settings dialog box to display the Save Settings dialog box after scanning. You can specify the data format and destination while viewing the thumbnails of scan results.
Page 88 (2) Scan Results Area Displays the thumbnails of the scanned images. You can change the save order of images via drag-and-drop. The file names for saving appear below the thumbnails. (3) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001"...
Page 89: Image Stitch Window
Image Stitch Window Click Stitch in the IJ Scan Utility main screen to display the Image Stitch window. You can scan the left and right halves of an item larger than the platen and combine the images back into one image. You can scan items up to approximately twice as large as the platen.
Page 90 • Full Platen x 2 Scans the left and right halves of an item twice as large as the platen separately. • Scan Direction • Scan from Left Displays the first scanned image on the left side. • Scan from Right Displays the first scanned image on the right side.
Page 91 • Adjust cropping frames You can adjust the scan area in preview. If no area is specified, the image of the size selected in Select Output Size will be saved. If an area is specified, only the image in the cropping frame will be scanned and saved.
Page 92 • (Rotate Left) Rotates the preview image 90 degrees counter-clockwise. • (Invert Vertically) Rotates the preview image 180 degrees. • (Rotate Right) Rotates the preview image 90 degrees clockwise. • (Open Guide) Opens this page. (3) Thumbnail View Area • Thumbnail View Area Displays the thumbnails of the scanned images.
Page 93 The image is scanned in the direction specified in Scan Direction, and 2 appears next to it. • After scanning the second item by clicking Start Scanning Image 2 The two scanned images appear. Related Topic Scanning Items Larger than the Platen (Image Stitch)
Page 94: Scanning With Application Software That You Are Using (Scangear)
Scanning with Application Software that You are Using (ScanGear) What Is ScanGear (Scanner Driver)? Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (Scanner Driver) Scanning in Basic Mode Scanning in Advanced Mode Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) ScanGear (Scanner Driver) Screens Placing Items (When Scanning from a Computer)
Page 95: What Is Scangear (Scanner Driver)
What Is ScanGear (Scanner Driver)? ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output size and make image corrections when scanning. ScanGear can be started from My Image Garden or IJ Scan Utility. It can be also started from other applications that are compatible with a standard interface called TWAIN.
Page 96 Advanced Mode Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning.
Page 97: Scanning With Advanced Settings Using Scangear (Scanner Driver)
Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (scanner driver) Starting ScanGear (Scanner Driver) Scanning documents after making simple image corrections Scanning in Basic Mode Scanning documents after making advanced image corrections and brightness/ color adjustments Scanning in Advanced Mode Scanning multiple documents at one time after making image corrections and color adjustments Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
Page 98: Starting Scangear (Scanner Driver)
Starting ScanGear (Scanner Driver) Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear can be started from My Image Garden or an application. Starting from My Image Garden Follow these steps to start ScanGear from My Image Garden. Start My Image Garden.
Page 99: Scanning In Basic Mode
Scanning in Basic Mode Use the Basic Mode tab to scan easily by following the on-screen steps. Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" to scan multiple documents at one time. Important The following types of documents may not be scanned correctly. In that case, click (Thumbnail) on the Toolbar to switch to whole image view and scan.
Page 100 Click Preview. Preview image appears in the Preview area. Note Colors are adjusted based on the document type selected in Select Source. Set Destination. Set Output Size according to purpose. Output size options vary by the item selected in Destination. Adjust the cropping frames (scan areas) as required.
Page 101 Related Topic Basic Mode Tab...
Page 102: Scanning In Advanced Mode
Scanning in Advanced Mode Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning. Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" to scan multiple documents at one time. Important The following types of documents may not be scanned correctly.
Page 103 Note Settings are not retained when you switch modes. Input Settings according to the document or purpose. Click Preview. Preview image appears in the Preview area. Output Settings. Adjust the cropping frame (scan area), correct image, and adjust colors as required. Adjusting Cropping Frames (ScanGear) Image Settings Color Adjustment Buttons...
Page 104 Related Topic Advanced Mode Tab...
Page 105: Scanning Multiple Documents At One Time With Scangear (Scanner Driver)
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) You can scan two or more photos (small documents) on the Platen at one time on the Basic Mode tab and Advanced Mode tab. This section explains how to scan multiple documents from the Basic Mode tab. Important To scan multiple documents as a single image, scan in whole image view.
Page 106 Click Preview. Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size. Set Destination. Set Output Size according to purpose. Adjust the cropping frames and set Image corrections as required. Note You can correct each image separately.
Page 107 Scanning Multiple Documents in Whole Image View Select the images you want to scan. Select the checkboxes of the images you want to scan. Click Scan. Scanning Multiple Documents in Whole Image View Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
Page 108 Set Output Size according to purpose. Invert aspect ratio will be enabled when Output Size is set to anything but Flexible. Click this button to rotate the cropping frame. Click again to return it to the original orientation. Adjust the cropping frames. Adjust the size and position of the cropping frames on the preview image.
Page 109: Correcting Images And Adjusting Colors With Scangear (Scanner Driver)
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) Sharpening out-of-focus photos, reducing dust and scratches, and correcting faded colors Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.) Previewing and changing the color tone of the entire image to scan Adjusting Colors Using a Color Pattern Brightening colors that have faded with time or due to colorcast Adjusting Saturation and Color Balance...
Page 110: Correcting Images (Unsharp Mask, Reduce Dust And Scratches, Fading Correction, Etc.)
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.) The Image Settings functions on the Advanced Mode tab of ScanGear (scanner driver) allow you to enhance the outline of the subjects, reduce dust/scratches, and correct faded colors when scanning images. Setting Items Click (Arrow) of a function and select an item from the pull-down menu.
Page 111 Adjusting the image brightness and color tone Set Image Adjustment to Auto, Photo, Magazine, or Document according to the document type. None Auto Reducing show-through in text documents or lightening the base color in recycled paper, newspapers, etc. when scanning documents Set Reduce Show-through to ON.
Page 112 Note Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect.
Page 113 Correcting shadows that appear between pages when scanning open booklets Set Gutter Shadow Correction to Low, Medium, or High according to the degree of shadows. None Medium...
Page 114: Adjusting Colors Using A Color Pattern
Adjusting Colors Using a Color Pattern You can preview color changes and reproduce natural colors by using the color pattern function in ScanGear (scanner driver)'s Basic Mode tab. Color Adjustment Correct colors that have faded with time or due to colorcast. "Colorcast" is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors.
Page 115 It is recommended that you find a portion in the image where it should be white, and adjust the colors so that the portion turns white. Preview image appears in the center. Preview image colors change as you adjust them. Below is an example of correcting a bluish image.
Page 116: Adjusting Saturation And Color Balance
Adjusting Saturation and Color Balance In ScanGear (scanner driver)'s Advanced Mode tab, click (Saturation/Color Balance). Note Click Defaults to reset all adjustments in the current window. Saturation Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.
Page 117 Color Balance Adjust images that have a colorcast. "Colorcast" is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors. Move (Slider) under Color Balance to the left or right to emphasize the corresponding color.
Page 118: Adjusting Brightness And Contrast
Adjusting Brightness and Contrast In ScanGear (scanner driver)'s Advanced Mode tab, click (Brightness/Contrast). Note Click (Down arrow) to switch to detailed view. Click (Up arrow) to return to the previous view. Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation).
Page 119 Adjust the Blue channel. Note Only Grayscale will be displayed in Channel when Color Mode is Grayscale. Brightness Adjust the image brightness. Move (Slider) under Brightness to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). Darkened Original image Brightened...
Page 120 Note Increasing the contrast is effective in adding a three-dimensional feel to soft images. However, shadows and highlights may be lost if you increase the contrast too much.
Page 121: Adjusting Histogram
Adjusting Histogram In ScanGear (scanner driver)'s Advanced Mode tab, click (Histogram). Note Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel." •...
Page 122 (1) Bright area (2) Dark area (3) Whole image More data is distributed to More data is distributed to Data is widely distributed the highlight side. the shadow side. between the highlight and shadow. Adjusting Histograms (Using the Slider) Select a Channel, then move (Black-point Slider) or (White-point Slider) to specify the level to be set as the shadow or highlight.
Page 123 Images with widely distributed data Move the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side. Moving the Mid-point Slider Move the Mid-point Slider to specify the level to be set as the middle of the tonal range. Images with more data distributed to the highlight side Move the Mid-point Slider toward the highlight side.
Page 124 - The point clicked with (Black-point Dropper) will be the darkest point. You can also enter a value (0 to 245). - The point clicked with (Mid-point Dropper) will be the middle of the tonal range. You can also enter a value (5 to 250). - The point clicked with (White-point Dropper) will be the brightest point.
Page 125: Adjusting Tone Curve
Adjusting Tone Curve In ScanGear (scanner driver)'s Advanced Mode tab, click (Tone Curve Settings). Note Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation).
Page 126 Adjusting Tone Curve In Select Tone Curve, select a tone curve from No correction, Overexposure, Underexposure, High contrast, Reverse the negative/positive image, and Edit custom curve. No correction (No adjustment) Overexposure (Convex curve) The midtone data of the input side is stretched toward the highlight of the output side, resulting in a bright-toned image when viewed on a monitor.
Page 127 Reverse the negative/positive image (Downward-sloping line) The input and output sides are reversed, resulting in a negative-positive inverted image. Edit custom curve You can drag specific points on the Tone Curve to freely adjust the brightness of the corresponding areas.
Page 128: Setting Threshold
Setting Threshold The brightness of color and grayscale images is expressed in a value between 0 and 255. However, in creating black and white images, all colors are mapped to either black (0) or white (255). "Threshold" is the borderline value that determines a color as black or white. By adjusting the threshold level, you can sharpen text in a document or reduce show-through in newspapers.
Page 129: Scangear (Scanner Driver) Screens
ScanGear (Scanner Driver) Screens Basic Mode Tab Advanced Mode Tab Input Settings Output Settings Image Settings Color Adjustment Buttons Preferences Dialog Box Scanner Tab Preview Tab Scan Tab Color Settings Tab...
Page 130: Basic Mode Tab
Basic Mode Tab This mode allows you to scan easily by following the on-screen steps. This section describes the settings and functions available on the Basic Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note The displayed items vary by document type and view. (1) Settings and Operation Buttons •...
Page 131 Note When you select a document type, the unsharp mask function will be active. The image adjustment function which adjusts images based on the document type will also be active. If you select Magazine (Color), the descreen function will be active. •...
Page 132 Output size options vary by the item selected in Destination. • Flexible Allows you to freely adjust the cropping frames (scan areas). In thumbnail view Drag the mouse over a thumbnail to display a cropping frame. When a cropping frame is displayed, the portion within the cropping frame will be scanned. When no cropping frame is displayed, each frame is scanned individually.
Page 133 appears in Output Size List. Click Save to save the items listed in Output Size List. Delete To delete an item, select it in Output Size List and click Delete. Click Save to save the items listed in Output Size List. Important You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
Page 134 Sharpens text in a document or magazine for better readability. Important Scanning may take longer than usual when this checkbox is selected. The color tone may change from the source image due to corrections. In that case, deselect the checkbox and scan. Correction may not be applied properly if the scan area is too small.
Page 135 You can adjust or rotate preview images. The buttons displayed on the Toolbar vary by view. In thumbnail view In whole image view • (Thumbnail) / (Whole Image) Switches the view in the Preview area. (3) Preview Area • (Rotate Left) Rotates the preview image 90 degrees counter-clockwise.
Page 136 • (Select All Cropping Frames) Available when two or more cropping frames are specified. Turns the cropping frames into thick broken lines and applies the settings to all of them. • (Remove Cropping Frame) Removes the selected cropping frame. • (Information) Displays the version of ScanGear and the current scan settings (document type, etc.).
Page 137 Note When multiple images are previewed, different outlines indicate different selection status. Focus Frame (thick blue outline): The displayed settings will be applied. Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously. You can select multiple images by clicking them while pressing the Ctrl key.
Page 138: Advanced Mode Tab
Advanced Mode Tab This mode allows you to make advanced scan settings such as the color mode, output resolution, image brightness, and color tone. This section describes the settings and functions available on the Advanced Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note...
Page 139 Enter Setting Name and click Add; the name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list and can be selected, along with the predefined items. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save the settings displayed in Favorite Settings List.
Page 140 Note You can also zoom in on an image by double-clicking the frame. Double-click the frame again to return the display to its non-magnified state. In whole image view Rescans the image in the area specified with a cropping frame at higher magnification. Note Zoom rescans the document and displays high-resolution image in Preview.
Page 141 It will take time to process the images if the total size of the scanned images exceeds a certain size. In that case, a warning message appears; it is recommended that you reduce the total size. To continue, scan in whole image view. •...
Page 142 Allows you to zoom in on the Preview area by clicking the image. Right-click the image to zoom out. • (Rotate Left) Rotates the preview image 90 degrees counter-clockwise. - The result will be reflected in the scanned image. - The image returns to its original state when you preview again. •...
Page 143 • (Open Guide) Opens this page. (3) Preview Area • Preview Area This is where a trial image appears after you click Preview. You can also check the results of the settings (image corrections, color adjustments, etc.) made in "(1) Settings and Operation Buttons."...
Page 144 Note You can specify the cropping frame on the displayed image. In thumbnail view, you can only create one cropping frame per image. In whole image view, you can create multiple cropping frames. Adjusting Cropping Frames (ScanGear) Related Topic Scanning in Advanced Mode...
Page 145: Input Settings
Input Settings Input Settings allows you to set the following items: • Select Source The type of document to be scanned is displayed. • Paper Size Select the size of the document to be scanned. This setting is available in whole image view only.
Page 146 Select this mode to scan color documents or to create color images. This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue). • Grayscale Select this mode to scan black and white photos or to create black and white images. This mode renders the image in 256 levels (8 bit) of black and white.
Page 147: Output Settings
Output Settings Output Settings allows you to set the following items: • Output Resolution Select the resolution to scan at. The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value within the range of 25 dpi to 19200 dpi (in 1 dpi increments).
Page 148 Note To enlarge/reduce the scanned image, enter values into (Width) and (Height) in Output Settings or specify a value (by 1 %) for %. Although the maximum value available for % depends on the Output Resolution, it can be specified for up to 19200 dpi (the maximum available output resolution). •...
Page 149 Note Save up to 10 items for each destination. An error message appears when you enter a value outside the setting range. Enter a value within the range displayed in the message. Note Refer to "Adjusting Cropping Frames (ScanGear)" for details on cropping frames. For details on whether or how the cropping frame is initially displayed on a preview image, refer to Cropping Frame on Previewed Images in "Preview...
Page 150: Image Settings
Image Settings Important Do not apply these functions to images without moire, dust/scratches, or faded colors. The color tone may be adversely affected. Image correction results may not be reflected in the preview image. Note Selectable settings depend on Color Mode settings. Scanning may take longer than usual when you use Image Settings.
Page 151 • Magazine Applies Image Adjustment suitable for magazines. • Document Applies Image Adjustment suitable for text documents. Important You can set Image Adjustment after preview. You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. Note If the image is not adjusted properly with Auto, specify the document type.
Page 152 pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect. • OFF Moire will not be reduced. • ON Reduces moire. It is recommended that you normally select this setting. Note Even if Descreen is set to ON, some moire effects may remain if Unsharp Mask is set to ON.
Page 153 Select this to correct a small amount of fading and colorcast. • Medium It is recommended that you normally select this setting. • High Select this to correct a large amount of fading and colorcast. This can affect the tone of the image.
Page 154 • Low Select this when the effect level is too strong with the medium setting. • Medium It is recommended that you normally select this setting. • High Select this when the effect level is too weak with the medium setting. Important Do not place objects that weigh 4.4 lbs (2.0 kg) or more on the Platen.
Page 155 Note Cover the document with black cloth if white spots, streaks, or colored patterns appear in scan results due to ambient light entering between the document and the Platen. If the shadow is not corrected properly, adjust the cropping frame (scan area) on the preview image.
Page 156: Color Adjustment Buttons
Color Adjustment Buttons The Color Adjustment Buttons allow you to make fine corrections to the image brightness and color tones including adjustments to the image's overall brightness or contrast and adjustments to its highlight and shadow values (histogram) or balance (tone curve). Important The Color Adjustment Buttons are not available when you select Color Matching on the Color Settings tab of the Preferences dialog box.
Page 157 Adjusting Brightness and Contrast • (Histogram) A histogram allows you to see the data concentration at each brightness level of an image. You can specify the brightest level (highlight) and darkest level (shadow) within an image, cut the levels and expand the middle of the tonal range of the image. Adjusting Histogram •...
Page 158 • Custom You can name and save a set of tone curve and threshold settings of the Color Adjustment Buttons. Select Add/Delete... from the pull-down menu; when Color Mode is set to anything but Black and White, the Add/Delete Tone Curve Settings dialog box opens; when Color Mode is Black and White, the Add/Delete Threshold Settings dialog box opens.
Page 159: Preferences Dialog Box
Preferences Dialog Box Click Preferences... in the ScanGear (scanner driver) screen to open the Preferences dialog box. In the Preferences dialog box, you can make advanced settings to ScanGear functions via the Scanner, Preview, Scan, and Color Settings tabs. Scanner Tab Allows you to set the quiet mode, auto power settings, folder in which to save images temporarily, and music file to play during or at the end of a scan.
Page 160: Scanner Tab
Scanner Tab On the Scanner tab, you can specify the following settings. • Auto Power Settings You can set to turn the machine on or off automatically. Click Settings... to display the Auto Power Settings dialog box. Note If the machine is off or bi-directional communication is disabled, a message may appear because the computer cannot collect the machine status.
Page 161 Click Settings... to set the quiet mode. Note You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear. No matter how the setting is made, it applies to operations from the operation panel of the machine or when printing/scanning from a computer, etc.
Page 162 - Audio file (*.wav, *.aif, *.aiff) - MP3 file (*.mp3) • Calibration Settings When you set Execute at Every Scan to ON, the scanner will be calibrated every time before previewing and scanning, to reproduce correct color tones in scanned images. Note Even when Execute at Every Scan is set to OFF, the scanner may be calibrated automatically in some cases (such as immediately after you turn the machine on).
Page 163: Preview Tab
Preview Tab On the Preview tab, you can specify the following settings. • Preview at Start of ScanGear Select what to do with Preview when ScanGear (scanner driver) is started. • Automatically Execute Preview ScanGear will automatically start previewing at startup. •...
Page 164 A cropping frame of the same size as the last used cropping frame will be displayed after previewing. • None No cropping frame will be displayed after previewing. • Cropping Size for Thumbnail View Select the cropping size for thumbnails of scanned documents. •...
Page 165: Scan Tab
Scan Tab On the Scan tab, you can specify the following settings. • Status of ScanGear dialog after scanning Select what to do with ScanGear (scanner driver) after scanning images. • Close ScanGear automatically Select this to return to the original application when scanning is completed. •...
Page 166: Color Settings Tab
Color Settings Tab On the Color Settings tab, you can specify the following settings. • Color Adjustment Select one of the following. You can select one when Color Mode is Color or Grayscale. • Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you normally select this setting.
Page 167 Note Color Matching is available when ScanGear, monitor, color management-compliant application (such as Adobe Photoshop), and printer are set up correctly. Refer to the corresponding manual for the monitor, printer, and application settings. • Monitor Gamma By setting the gamma value of a monitor, you can adjust the input data to the brightness characteristics of the monitor.
Page 168: Placing Items (When Scanning From A Computer)
Placing Items (When Scanning from a Computer) Learn how to place items on the platen of your scanner or printer. Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly. Important Do not place objects on the document cover.
Page 169 Important Important Large items (such as A4 size photos) that Refer to "Loading Originals" for your cannot be placed away from the edges/ model from Home of the Online arrow (alignment mark) of the platen may Manual for details on the portions in be saved as PDF files.
Page 170: Adjusting Cropping Frames (Scangear)
Adjusting Cropping Frames (ScanGear) "Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when scanning it. On the Basic Mode tab and Advanced Mode tab, you can specify cropping frames (scan areas) on the image(s) displayed in the Preview area of the screen.
Page 171 (2) Thin cropping frame - In thumbnail view Output size, image corrections, and other settings on the Basic Mode tab or Advanced Mode tab will be applied. - In whole image view Represents an unselected cropping frame. The settings on the Basic Mode tab or Advanced Mode tab will not be applied.
Page 172 In whole image view Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame in the Preview area. The new cropping frame will be the active cropping frame, and the old cropping frame will be the unselected cropping frame. You can create multiple cropping frames and apply different scan settings to each cropping frame.
Page 173 To delete a cropping frame, click an area outside the cropping frame on an image. In whole image view To delete a cropping frame, select it and click (Remove Cropping Frame) on the Toolbar. Alternatively, press the Delete key. When there are multiple cropping frames, all the selected cropping frames (active cropping frame and selected cropping frames) are deleted simultaneously.
Page 174: General Notes (Scanner Driver)
General Notes (Scanner Driver) ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it. Scanner Driver Restrictions • When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons.
Page 175 Applications with Restrictions on Use • If you start Media Center included in Windows XP Media Center Edition 2005, you may not be able to scan using the operation panel of the machine. In that case, restart the computer. • You cannot scan images with Media Center included in Windows XP Media Center Edition 2005.
Page 176: Useful Information On Scanning
Useful Information on Scanning Adjusting Cropping Frames in the Image Stitch Window Resolution Data Formats Color Matching...
Page 177: Adjusting Cropping Frames In The Image Stitch Window
Adjusting Cropping Frames in the Image Stitch Window "Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when scanning it. In the Image Stitch window, you can specify a cropping frame on the image displayed in the Preview area.
Page 178: Resolution
Resolution The data in the image you have scanned is a collection of dots carrying information about brightness and color. The density of these dots is called "resolution", and resolution will determine the amount of detail your image contains. The unit of resolution is dots per inch (dpi).
Page 179 Attaching to e-mail Color, Grayscale, or 150 dpi Black and White Scanning text using OCR Color or Grayscale 300 dpi Important If you double the resolution, the data size of the scanned image quadruples. If the file is too large, the processing speed will slow down significantly, and you will experience inconvenience such as lack of memory.
Page 180: Data Formats
Data Formats You can select a data format when saving scanned images. You should specify the most suitable data format according to how you want to use the image on which application. Available data formats vary by application and operating system (Windows or Mac OS). See below for the characteristics of each image data format.
Page 181: Color Matching
Color Matching "Color Matching" is the act of making adjustments so that the color tones match between the original item, the monitor display, and the color printout. On your scanner or printer, the color tones are adjusted as shown below. Example: When sRGB is selected as the output profile (target) Input Profile (Source) Scanner...
Page 182: Ij Network Scanner Selector Ex Menu And Setting Screen
Select the Search charm, then click IJ Network Scanner Selector EX from the displayed screen. Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX. Menu...
Page 183 • Settings... The Scan-from-PC Settings screen appears. You can select the model you want to use. • About Displays the version information. • Exit Exits IJ Network Scanner Selector EX; (Enabled) or (Disabled) disappears from the notification area on the desktop. Scan-from-PC Settings Screen Your scanner or printer must be selected with IJ Network Scanner Selector EX before scanning over a network.
Page 184 You can select up to three scanners and printers in total at the same time. Selecting a scanner or printer automatically enables scanning from the operation panel. • Instructions Opens this guide. Important When using a model with which you cannot scan over a network from the operation panel, Scan-from-Operation-Panel Settings may appear in the Scan-from-PC Settings screen;...
Page 185: Uninstalling Ij Network Scanner Selector Ex
1. Select the Search charm, then click Control Panel from the displayed screen. 2. Click Programs and Features. 3. Select Canon IJ Network Scanner Selector EX from the program list, then click Uninstall/Change. Note If the User Account Control screen appears, click Continue.
Page 186 Note When the message prompting you to restart your computer appears, click OK to restart your computer.
Page 187: Other Scanning Methods
Other Scanning Methods Scanning with WIA Driver Scanning Using the Control Panel (Windows XP Only)
Page 188: Scanning With Wia Driver
If you have more than one scanner or printer, a scanner selection screen may appear. Double-click the scanner you want to use. For USB connection: Canon XXX series (where "XXX" is the model name) For network connection: XXX series_MAC address (where "XXX" is the model...
Page 189 Specify the settings. • Scanners The currently set product name is displayed. To change the scanner, click Change... and select the product you want to use. • Profile Select Photo (Default) or Documents according to the item to be scanned. To save a new Profile, select Add profile..
Page 190 Important When using the scanner or printer with network connection, you cannot specify Brightness, Contrast, and Preview or scan images as separate files. Click Preview to preview the image. The preview image appears on the right. Click Scan. When scanning is completed, the scanned image appears in the application. Scanning with WIA Driver 1.0 The following is an example of scanning using "Paint."...
Page 191 the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127). • Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. Resolution Note When using the scanner or printer with network connection, the following resolutions can be specified.
Page 192: Scanning Using The Control Panel (Windows Xp Only)
WIA driver. From the Start menu, select Control Panel. Click Printers and Other Hardware > Scanners and Cameras, then double-click Canon XXX series (where "XXX" is the model name). The Scanner and Camera Wizard dialog box appears. Click Next. Select Picture type according to the item to be scanned.
Page 193 • Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). • Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image.
Page 194: Placing Items (When Scanning From A Computer)
Placing Items (When Scanning from a Computer) Learn how to place items on the platen of your scanner or printer. Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly. Important Do not place objects on the document cover.
Page 195 Important Important Large items (such as A4 size photos) that Refer to "Loading Originals" for your cannot be placed away from the edges/ model from Home of the Online arrow (alignment mark) of the platen may Manual for details on the portions in be saved as PDF files.
Page 196: Scanning From The Operation Panel Of The Machine
Scanning from the Operation Panel of the Machine Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine Basic Attaching the Scanned Data to E-mail Using the Operation Panel of the Machine Saving Scanned Data on the Memory Card Using the Operation Panel of the Machine Deleting Scanned Data on Memory Card Setting Items on the Operation Panel of the Machine Network Scan Settings...
Page 197: Forwarding Scanned Data To The Computer Using The Operation Panel Of The Machine
Network Scan Settings • The destination and the file name are specified in Canon IJ Scan Utility. You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility: Settings Dialog Box 1.
Page 198 If you forward the data to the network-connected computer: The screen for selecting to which you save the data is displayed. Note • If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on the LCD, press the left Function button to display the screen for selecting to which you save the data.
Page 199 Auto scan This item is available only when the machine is connected to the computer using a USB cable. The machine detects the type of the originals automatically and the image is forwarded in the optimized size, resolution and data format. Important •...
Page 200 The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action, then click OK. From the next time, Canon IJ Scan Utility is automatically started.
Page 201 • If you want to convert a scanned document to text: Extracting Text from Scanned Images (OCR)
Page 202: Attaching The Scanned Data To E-Mail Using The Operation Panel Of The Machine
Network Scan Settings • The mail software and the file name are specified in Canon IJ Scan Utility. You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility: Settings Dialog Box 1.
Page 203 3. Select Attach to E-mail, then press the OK button. 4. Use the button to select the computer to forward the scanned data, then press the OK button. Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data for a network-connected computer.
Page 204 The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action, then click OK. From the next time, Canon IJ Scan Utility is automatically started.
Page 205: Saving Scanned Data On The Memory Card Using The Operation Panel Of The Machine
Saving Scanned Data on the Memory Card Using the Operation Panel of the Machine You can save scanned data on the memory card using the operation panel. Important • Do not remove the memory card from the machine under the following conditions: •...
Page 206 4. Select Memory card, then press the OK button. 5. Select Save to memory card, then press the OK button. The Scan standby screen is displayed. 6. Use the button to select the document type. Document Scans the original on the platen glass as a document data applying the settings specified in Scan settings.
Page 207 If you do not continue scanning, press the left Function button. The scanned data is saved on the memory card in one PDF file. When you scan the originals continuously, you can save up to 100 pages of images in one PDF file. Remove the original on the platen glass after scanning is complete.
Page 208: Deleting Scanned Data On Memory Card
Deleting Scanned Data on Memory Card You can delete scanned data on the memory card using the operation panel. 1. Make sure that the machine is turned on. 2. Select Scan on the HOME screen. LCD and Operation Panel The screen for selecting to which you save the data is displayed. Note •...
Page 209 By pressing the left Function button, you can switch the display between the PDF data list and the JPEG data list. 2. Change display By pressing the center Function button, you can switch the display between the list and the preview.
Page 210: Setting Items On The Operation Panel Of The Machine
• When you forward the scanned data to the computer or attach the data to an e-mail, you can specify the destination and file name using Canon IJ Scan Utility. Settings Dialog Box • If you scan originals from the computer, you can scan with advanced settings. For details on scanning...
Page 211 Select the data format of the scanned data. 3. Scan res (Scan resolution) Select the resolution for scanning. 4. Preview Select to preview the scanned data or not when saving the data on a memory card. 5. Reduce show-thru (Reducing show-through) Characters on the back may show through when scanning a thin document such as a newspaper.
Page 212: Network Scan Settings
Network Scan Settings You can connect your scanner or printer to a network to share it among multiple computers or scan images into a specified computer. Important Multiple users cannot scan at the same time. Note Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or by following the instructions on the web page.
Page 213 Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX. The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3.
Page 214 Search charm, then search for "IJ Network Scanner Selector EX". Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX. The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears.
Page 215 Select your scanner or printer from Scanners and click OK. Select the MAC address of your scanner or printer. Note When multiple scanners are connected via a network, you can select up to three scanners. In the Scan-from-PC Settings screen, click OK. Note If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again.
Page 216: Selecting A Response To Commands From The Operation Panel Using Ij Scan Utility
Selecting a Response to Commands from the Operation Panel Using IJ Scan Utility IJ Scan Utility allows you to specify how to respond when scanning from the operation panel. Note The screens for specifying the responses when performing Auto Scan from the operation panel are used as examples in the following descriptions.
Page 217 Note Refer to the following for details. Settings (Save to PC (Auto)) Dialog Box Settings (Save to PC (Photo)) Dialog Box Settings (Save to PC (Document)) Dialog Box Settings (Attach to E-mail (Photo)) Dialog Box Settings (Attach to E-mail (Document)) Dialog Box Specify image corrections in Scan Options.
Page 218 Select the application you want to start after scanning in Application Settings. Click OK. The responses will be executed according to the specified settings when you start scanning from the operation panel.
Page 219: Scanning With The Access Point Mode
Scanning with the Access Point Mode When the machine enters the access point mode, you can scan from an external device such as a computer or a smartphone without involving an access point. Important • Before you use the machine with the access point mode, be sure to specify the access point name of the machine and the security setting.
Page 220 Note • For details on how to scan from an external device such as a computer or a smartphone via wireless LAN, refer to the device's or application's instruction manual. • You can also scan using PIXMA Printing Solutions. 8. Press the left Function button when scanning is completed. The machine exits from the access point mode.

Canon MG6400 series Online Manual

Scanning

Scanning from the Operation Panel of the Machine

Scanning with the Access Point Mode

Quick Links

Related Manuals for Canon MG6400 series

Summary of Contents for Canon MG6400 series

Table of Contents