Burst Level - Panasonic VDR-M70EG Service Manual

6.4.3.

Burst Level

Preparations:
1) Connect the oscilloscope CH1 to video out.
2) Switch the oscilloscope V-MODE to "CH1" and
TRIGGER SOURCE to "CH1".
Procedure:
1) Choose BURST LEVEL on the ADJUST MENU screen.
2) Click the EXECUTE button on ADJUST MENU screen
to proceed with the BURST LEVEL ADJUSTMENT
screen.
3) Click the UP or DOWN button so that burst level of the
waveform is 300mV ± 15 mVp-p. Click the button at
approx. 2-second intervals while checking any increase
or decrease in burst level.
4) After step 3) is complete, be sure to click the SAVE
button.
Note that clicking the RETURN button will restore the
ADJUST MENU screen to the status before the
adjustment was performed.
5) When save is complete, the ADJUSTMENT FINISHED
dialog will appear: Click the OK button in dialog to
restore the ADJUST MENU screen.
Downloaded From CamcorderManual.com Panasonic Manuals
300mV
± 15mVp-p
Fig. 6-4-2
VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
SPOT NOISE
LCD
EVF
2
CONNECTION
BURST LEVEL ADJUSTMENT screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
BURST LEVEL ADJUSTMENT
UP
4 SAVE
CONNECTION
ADJUSTMENT FINISHED dialog
FINISHED FINISHED
ADJUSTMENT FINISHED. ADJUSTMENT FINISHED.
OK OK
103
××××
1
EXECUTE RETURN
DOWN
3
RETURN
5 5