Panasonic VDR-M70EG Service Manual page 84

VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
6.1.4. Setting when Creating Reference Data
When the connections for creating reference data are complete, set the DVD video camera/recorder
and test equipment as follows:
1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data.
2) Set the power switch to "VIDEO" and quick mode switch to "OFF": After that operate the DVD
video camera/recorder while watching the LCD monitor screen.
3) Press the MENU button to display the menu screen.
4) Use the joystick to choose "Initial Setup", and then press the center of joystick.
5) Use the joystick to choose "Reset", and then press the center of joystick: The screen for verifying
reset will appear.
6) Use the joystick to choose "ENTER", and then press the center of joystick: Reset will be executed.
7) Press the MENU button to restore the normal display.
Information:
The following table shows the menu status after the above settings:
The settings for Date Setup are not shown in the table below, since they do not have any meaning
when creating reference data.
Item
Camera Functions Setup
Program AE
White Balance
EIS
Dig. Zoom
Wind Cut
Cinema
Recording Functions Setup
VIDEO Mode
Quality
(*1)
Input Source
PHOTO Input
Self Timer
OSD Output
Downloaded From CamcorderManual.com Panasonic Manuals
Setting
Auto Brightness
Auto Color Level
On
×40
Beep
Off
Power Save
Off
Record LED
Language
FINE
FINE
*1: Display only on models that have the line input
CAMERA
function.
Field
Off
Off
84
Item Setting
LCD Setup
Initial Setup
English
+
+
On
Off
On