Panasonic VDR-M70EG Service Manual page 96

VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
Information:
When communications between the PC and DVD video
camera/recorder are normal during adjustment, the word
"CONNECTION" in status bar (bottom left) of each screen
will flash.
6) Choose the radio button of corresponding model name in
MODEL SELECT screen.
7) Click the ENTER button in MODEL SELECT screen,
and then proceed with the ADJUST MENU screen.
Start of the adjustment program is now complete. Refer
to "6-3 Adjustment Procedure" for subsequent
operations.
If there is an error in model selection, the FILE
HANDLE ERROR dialog will appear. Click the OK
button, and then choose the correct model.
Note:
If the FILE HANDLE ERROR dialog appears when the
correct model has been chosen, obtain (download) the
newest adjustment program, and then start over again.
(2) Termination
1) Click the RETURN button on MENU screen of
adjustment program to return to the MODEL SELECT
screen.
2) Click the EXIT button on the MODEL SELECT screen.
Information:
If the PC does not accept any operation during work, or
the reference data creating program does not work,
perform the following procedure:
1) Set the power switch of reference data creating device
to "OFF".
2) Turn off the DC power supply of DSP-R interface jig.
3) Simultaneously press the Ctrl, Alt and Delete keys on
PC keyboard to restart the PC.
4) After the PC restarts, set the power switch of reference
data creating device to "VIDEO" and turn on the DC
power supply of DSP-R interface jig again.
5) Restart the reference data creating program.
Downloaded From CamcorderManual.com Panasonic Manuals
MODEL SELECT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL SELECT
× × × ×
× × × ×
× × × ×
× × × ×
7
6
CONNECTION
ADJUST MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
SPOT NOISE
LCD
EVF
CONNECTION
FILE HANDLE ERROR dialog
ERROR ERROR
! !
File hundle error. [SYMBOL FILE] File hundle error. [SYMBOL FILE]
OK OK
96
ENTER EXIT
××××
EXECUTE
RETURN