Panasonic VDR-M70EG Service Manual page 67

(4) Front Block and R Block
1) Open the jack cover (c), and then remove one
screw [N].
2) Remove one screw [N].
3) Remove the FRT-H/FRT circuit board (d)
from AEL-H/AEL circuit board (e) in the
direction of the arrow.
4) Remove the front block (a) from R block (b)
in the direction of the arrow.
(5) Jack Cover
1) Release the two tabs, and then remove the
jack cover (a).
(6) FRT-H/FRT circuit board, Microphone,
and Microphone Cover
FRT-H/FRT circuit board (a)
1) Disconnect the flat cable from microphone.
2) Remove one screw [D], and then remove the
FRT-H/FRT circuit board.
Microphone (b) and Microphone Cover (c)
3) Remove one screw [D], and then remove the
microphone and microphone cover from the
front case (d).
Downloaded From CamcorderManual.com Panasonic Manuals
VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC
(a) Front block
(b) R block
(c) Jack cover
(d) FRT-H/FRT circuit board
(e) AEL-H/AEL circuit board
(b)
(a)
4)
3)
1) [N]
(d)
2) [N]
(c)
Fig. 5-3-5
(a) Jack cover
(b)
(b) Front block
Tabs
Fig. 5-3-6
(a) FRT-H/FRT circuit board
(b) Microphone
(c) Microphone cover
(d) Front Case
(d)
Fig. 5-3-7
67
(e)
[N] M1.7x4 (Silver)
(a)
2) [D]
(a)
1)
3) [D]
(b)
(c)
[D] M1.7x4 (Black)