Installing The Underride Guard; Removing The Battery - KTM 990 Adventure AUS/UK Owner's Manual

MAINTENANCE WORK ON FRAME AND ENGINE

Installing the underride guard

9.42

Removing the battery

x
9.43
Warning
Risk of injury Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.
x
–
Position underride guard
Guideline
Screw, underride guard
–
Swing up the side stand.
–
Raise the vehicle off of the center stand. (
100578-10
–
Switch off all power consumers and the engine.
–
Remove the underride guard.
. Mount and tighten screws

M8 25 Nm
(18.4 lbf ft)
p. 66)
x ( p. 110)
.

Loctite ® 243™
111