Bosch GWS 10,8-76 V-EC Original Instructions Manual page 16

OBJ_BUCH-2534-001.book Page 16 Thursday, September 3, 2015 2:42 PM
16 | English
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to ex-
plosion. Penetrating a water line causes property damage.
 Release the On/Off switch and set it to the off position
when the power supply is interrupted, e.g. when the bat-
tery pack is removed.
 Do not touch grinding and cutting discs before they have
cooled down. The discs can become very hot while work-
ing.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek med-
ical help in case of complaints. The vapours can irritate the
respiratory system.
 Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting and roughing of metal,
stone and wood materials, plastics, non-ferrous metals and
tiles without the use of water. A specific protection guard must
be used when cutting.
Product Features
The numbering of the product features refers to the illustration
of the machine on the graphics page.
1 Direction-of-rotation arrow on housing
2 Spindle lock button
3 On/Off switch
4 Battery pack*
5 Battery unlocking button*
6 Battery charge-control indicator
7 Protection guard for grinding
1 609 92A 0W5 | (3.9.15)
8 Grinder spindle
9 Handle (insulated gripping surface)
10 Protection guard for cutting*
11 Clamping bolt with washer
12 Cutting disc*
13 Hex key
*Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can be
found in our accessories program.
Technical Data
Grinder
Article number
Rated voltage
Rated speed min
Grinding disc diameter, max.
Mounting hole diameter
Weight according to EPTA-
Procedure 01:2014
Protection class
Permitted ambient
temperature
– during charging
**
– during operation and during
storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are: Sound
pressure level 75 dB(A); Sound power level 86 dB(A). Uncer-
tainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing): a =13.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
GWS 10,8-76 V-EC
3 601 JF2 ...
V= 10.8
-1
19500
mm 76
mm 10
kg 0.70/0.89*
/ II
°C 0...+45
°C –20...+50
GBA 10.8V ...
AL 11... CV
2 2
, K=1.5 m/s
Bosch Power Tools